BH FITNESS TS 2 User Manual (English)

Questions and Answers:

J
Jared GloverJul 31, 2025
How to fix loss of feedback on BH FITNESS TS 2?
- S
  Sara SmithJul 31, 2025
  If you're experiencing a loss of feedback on your BH FITNESS Treadmill, there are several potential causes. It could be due to a disconnected or misaligned speed sensor, so check the speed sensor connection and its position. A faulty speed sensor, MCB (with D2 LED on), or drive motor could also be the culprit, in which case replacing the respective component is advised. Finally, a loose display connection could be the reason, so ensure the display cable is securely connected.
M
Margaret GrossAug 7, 2025
What to do if the display doesn’t light up on BH FITNESS TS 2 Treadmill?
- T
  theresa09Aug 8, 2025
  If the display on your BH FITNESS Treadmill doesn't light up, first ensure the unit is turned on using the On/Off switch. Next, check the fuses on the MCB. Also, make sure the unit is plugged into a dedicated 120V, 20A outlet to ensure a sufficient power source.
C
Corey WilsonAug 16, 2025
Why is the elevation motor stalled on my BH FITNESS TS 2?
- B
  brenda77Aug 16, 2025
  If the elevation motor on your BH FITNESS Treadmill is stalled, it might be due to the motor screw binding. Try cleaning the screw, lubricating it, or removing any obstructions. Alternatively, the motor could be out of range, requiring you to check the motor's zero position. Finally, the issue might stem from the Elv. Potentiometer, in which case you should calibrate the elevation motor.
B
Beth MeyerAug 23, 2025
What to do if safety key is off on BH FITNESS TS 2 Treadmill?
- E
  Evelyn ChenAug 23, 2025
  If your BH FITNESS Treadmill indicates the safety key is off, the safety key itself or the switch may be faulty. Check the safety key and the switch to resolve this issue.