BH FITNESS T1 BASIC User Manual (English)

Questions and Answers:

J
Julie DelacruzJul 31, 2025
What to do if my BH FITNESS T1 BASIC Treadmill shows error E1?
- R
  Rhonda JohnsonJul 31, 2025
  If your BH FITNESS Treadmill displays error code E1, it could be due to several reasons. Here's what you can check: * **Speed Sensor:** Ensure it's properly connected. If the connection is fine, the sensor might be faulty and need replacement. * **Running Deck:** Lack of lubrication or misalignment of the speed sensor can also trigger this error. Check the R-Deck oil and sensor position. * **Display Cable:** A loose display cable can cause this error, so check its connection. * **MCB:** If the D2 LED is on, the MCB might be faulty and needs replacement. * **Drive Motor:** Make sure the drive motor is connected and not faulty. If disconnected, connect it. If faulty, replace it.
P
pamelaortizAug 9, 2025
What to do if BH FITNESS Treadmill displays error E7?
- R
  Richard BaldwinAug 9, 2025
  If your BH FITNESS Treadmill shows error E7, it could stem from a few potential issues: * **Elevation Motor:** It might be out of range and require replacement. * **Power:** Ensure the unit is turned on and connected to a dedicated 120V, 20Amp outlet. An insufficient power source can cause this error. * **Line Cord:** Inspect the line cord for damage and replace it if necessary. * **Fuse:** Check the fuse on the MCB.
N
nicholas76Aug 18, 2025
Why does my BH FITNESS T1 BASIC Treadmill show error E6?
- W
  williammorenoAug 18, 2025
  If your BH FITNESS Treadmill displays error code E6, it could be due to: * **Safety Key:** The safety key or switch might be faulty; check them. * **Elevation Motor:** The elevation motor might not be moving; check its connection. Also, the elevation motor screw might be binding; clean and lubricate it.

BH FITNESS T1 BASIC Specifications

General

Running Area	120 x 40 cm
Max Speed	12 km/h
Incline	Manual
Maximum User Weight	100 kg
Dimensions (LxWxH)	140 x 65 x 125 cm
Foldable	Yes
Display	LCD
Incline Levels	3

Summary

INTRODUCTION

BEFORE YOU BEGIN

Familiarize yourself with the frequently used components of your BH Fitness treadmill.

IMPORTANT SAFETY INSTRUCTIONS

WARNING! CRITICAL SAFETY ADVICE

Critical safety warnings and precautions for operating the treadmill.

PROPER GROUNDING GUIDELINES

Proper grounding procedures to prevent electrical shock hazards.

ASSEMBLY INSTRUCTIONS

PARTS LIST AND ASSEMBLY DIAGRAM

List of all parts included and an exploded view diagram for assembly.

CONNECTING UPRIGHTS AND COVERS

Detailed steps for attaching uprights and side covers, including wire management.

INSTALLING CONSOLE AND HANDRAIL COVERS

Final steps for attaching the computer console and handrail covers.

GETTING STARTED WITH YOUR TREADMILL

FOLDING AND UNFOLDING PROCEDURE

Instructions on how to fold and unfold the treadmill into an upright position.

MOVING THE TREADMILL SAFELY

Guidance on how to move the treadmill safely after it's locked in an upright position.

SAFETY KEY AND CLIP OPERATION

Explanation of the safety key function and how to use it for stopping the treadmill.

UNDERSTANDING CONSOLE BUTTONS

Description of the main console buttons (START, MODE, STOP, ENTER) and their functions.

CONSOLE DISPLAY FEEDBACK

Explanation of the data displayed on the treadmill console (TIME, CALORIES, INCLINE, PULSE, SPEED, DISTANCE).

USING GRIP PULSE SENSORS

How to use the grip pulse sensors to monitor heart rate during workouts.

QUICK START WORKOUT GUIDE

Step-by-step guide for initiating and adjusting a quick start workout.

STOPPING THE TREADMILL

Instructions on how to safely stop the treadmill using the STOP button or safety key.

WORKOUT PROGRAM DETAILS

MANUAL PROGRAM SETUP

Steps to set up and start a manual workout program with custom speed and incline.

PRESET PROGRAM SELECTION

Steps to select and configure factory installed preset workout programs (P1-P6).

9 HOLE WALK PROGRAM SPECIFICATIONS

Details of speed and elevation changes for the '9 HOLE WALK' program.

HILL CLIMB PROGRAM SPECIFICATIONS

Details of speed and elevation changes for the 'HILL CLIMB' program.

ENDURANCE RUN PROGRAM SPECIFICATIONS

Details of speed and elevation changes for the 'ENDURANCE RUN' program.

INTERVAL RUN PROGRAM SPECIFICATIONS

Details of speed and elevation changes for the 'INTERVAL RUN' program.

ROLLING RUN PROGRAM SPECIFICATIONS

Details of speed and elevation changes for the 'ROLLING RUN' program.

WEIGHT LOSS PROGRAM SPECIFICATIONS

Details of speed and elevation changes for the 'WEIGHT LOSS' program.

WORKOUT PROGRAM NOTES AND ADJUSTMENTS

Notes on manual adjustments, warm-up/cool-down stages, and program specifics.

PREVENTIVE MAINTENANCE

RUNNING BELT ALIGNMENT

Instructions on how to adjust the treadmill running belt to keep it centered.

TREADMILL DECK LUBRICATION

Recommendations and steps for lubricating the treadmill deck.

TROUBLESHOOTING COMMON ISSUES

ERROR CODE E1 RESOLUTION

Troubleshooting steps for error code E1 related to feedback or sensors.

ERROR CODE E6 RESOLUTION

Troubleshooting steps for error code E6 related to safety key or elevation motor.

ERROR CODE E7 RESOLUTION

Troubleshooting steps for error code E7 related to elevation motor or display.

WARRANTY AND REGISTRATION

USA/CANADA WARRANTY TERMS

Details of the exclusive limited warranty for USA and Canada.

WARRANTY EXCLUSIONS AND REMEDIES

Explanation of the exclusive remedy, limitations, and exclusions applicable to the warranty.

WARRANTY REGISTRATION PROCESS

Instructions on how to complete and submit the warranty registration card.

Related product manuals

BH FITNESS TR101i BZ6340VE

BH FITNESS Run Desk Pro

15 pages

BH FITNESS Pioneer Classic

64 pages

BH FITNESS i.F8 Dual G6428UW

74 pages

BH FITNESS T1 BASIC User Manual

Table of Contents