ASSEMBLY INSTRUCTIONS CONTINUED
4. Place the Computer Console (A)
on the Upright, then connect the
Control Wire of the Main Frame
to the Control Wire in the
Computer Console (A), then
secure with Allen Bolts (c, i).
* When you tighten the bolts, make
sure not to damage the control wires
in the tube.
5. After the above step is finished,
install the Protecting Covers (E)
onto the Handrail bar.
BH Fitness • 20155 Ellipse • Foothill Ranch • CA • 92610
www.bhnorthamerica.com • Phone 949-206-8152 • Fax 949-206-0013
7
To Next Page
Loading...
