Bending the hair band
In order to ensure an optimum fit when using
the hair band, we recommend bending the
hair band as required. Please follow the
instructions step by step, as shown in the
diagrams.
Warning: Risk of scalding – please keep
children away from this process!
1) First remove the electronic component, bone
conduction receiver and cable from the hair
band. Then dip the hair band into a suitable
container filled with hot water for approx.
4 minutes, as shown in Figure 1.
(80 degrees Celsius). Please make sure
that the rubber mounting for the cable
does not come into contact with the water.
2) Bend the hair band according to your
requirements i.e. to fit the required head
shape.
Fig. 2
max
Fig. 1
80°C
4 min.
To Next Page
Loading...