Switching to telecoil – Optional
(only for contact mini with telecoil)
In order to switch the device, set the M-T
switch to the "T" position. The telecoil en-
ables you to receive inductive signals (e.g.
from the telephone or induction loop). This
enables you, for example, to hear the person
on the other end of the line more clearly, as
the microphone is switched off and disruptive
background noises are therefore prevented.
Please note that you must use a phone that
is suitable for a hearing device in order to
make optimum use of the telecoil. The tele-
coil can also be used in public buildings that
have an induction loop, for example in
schools, theatres, concert halls or cinemas.
Battery warning tone
Contact mini is equipped with a battery
warning tone. When the battery is weak,
amplification will automatically be reduced.
When the warning tone sounds, the battery
must be changed immediately.
Sound Dynamix (BHM Automatic
)
In Automatic mode, the signal received by the
microphone is analysed and categorised into
different hearing situations.
These are:
• Quiet environments
• Speech in quiet environments
• Speech in background noise
• Music and movie
• Background noises
• Wind noises
The parameters of the hearing system are
always configured according to this categorisati-
on such that an optimal level of hearing comfort
and optimal speech comprehension are attained.
To Next Page
Loading...