Biamp TesiraFORTE X 400 - User Manual

TesiraFORTÉ X
The TesiraFORTÉ X is the next generation of Tesira DSP processing and is introduced in conjunction with Tesira 4.0
software and firmware. TesiraFORTÉ X combines powerful elements of multiple previous Tesira devices in one product
for quick and easy integration in medium to large conference spaces.
The TesiraFORTÉ X 400/800/1600 products are conference room DSPs featuring multiple network and analog audio
connection points. With 4, 8, and 16 channels of Acoustic Echo Cancelation (AEC) respectively, users can choose the
model that meets the number of microphones required for the room.
TesiraFORTÉ X is designed to be used primarily with Biamp’s beam-forming microphones, PoE amplifiers and
speakers. A system including these elements and a UC-room system, display and camera will provide a complete
technology solution for a UC-enabled conference room.
The typical function of the TesiraFORTÉ X is to process local Biamp microphone input and speaker output signals in
support of audio-only and audio/video conference calls from dedicated conference rooms, but TesiraFORTÉ X can also
be custom programmed for many other applications.
TesiraFORTÉ X offers installers two discrete modes of operation. The default behavior allows single-button press auto-
configuration assisted by Biamp Launch. The second option allows users to manually configure and completely
customize the device signal paths a la a traditional Tesira DSP device.
TesiraFORTÉ X discovery and connection can be done through the Biamp Discovery app or using Biamp
Tesira software (version 4.0 and higher).
Models
There are 3 TesiraFORTÉ X models supporting various densities of AEC processing depending on your requirements.
All are externally physically identical aside from their model name. The same power supply model is used for all 3 units.
• TesiraFORTÉ X 400 has 4 channels of AEC,
supporting up to 4 Parlé microphones
• TesiraFORTÉ X 800 has 8 channels of AEC,
supporting up to 8 Parlé microphones
• TesiraFORTÉ X 1600 has 16 channels of AEC,
supporting up to 16 Parlé microphones
When using Biamp Launch auto-configuration a maximum of 8 Parlé microphones are supported on TesiraFORTÉ X
1600. Up to 8 channels of amplification are supported on all models when using Biamp Launch auto-configuration.
These limitations do not apply to manually configured TesiraFORTÉ X.
Copyright 2013-2020 Biamp Systems http://support.biamp.com/
1

Summary

Models

TesiraFORTÉ X 400

Model with 4 AEC channels, supporting up to 4 Parlé microphones.

TesiraFORTÉ X 800

Model with 8 AEC channels, supporting up to 8 Parlé microphones.

TesiraFORTÉ X 1600

Model with 16 AEC channels, supporting up to 16 Parlé microphones.

Configuration Options

Biamp Launch Auto-configuration

Automated system hardware discovery, configuration, and tuning.

Manual Configuration

Manual Configuration Process

Define signal paths, analog I/O, GPIO, and Dante I/O via Tesira software.

Device Comparison and Connectivity

TesiraFORTÉ X vs. Devio SCX

Compares Tesira FORTÉ X and Devio SCX, highlighting flexibility.

Network Connectivity and Discovery

Details the 5-port appliance and IP discovery methods.

Web Interface Access and Security

Password Management

Default credentials and persistence across resets.

Web User Interface Features

Access and behavior based on configuration mode.

Network Behavior and Protocols

Network Port Modes and Protocols

Explains port modes, 802.1x, AVB/Dante rules, and network protocols.

Network Identification

MAC Address Allocation

Lists MAC addresses and their typical allocation.

System Integration and Management

Network Command Strings and Control Devices

Command strings for communication and control device connection.

Firmware Updates

Information on updating firmware via web UI or Tesira software.

Input;Output Options

Dante and AVB Interfaces

Supports AVB, Dante, AES67 with virtual Dante and AVB interfaces.

AVB Audio Transport

Details implicit AVB for audio transport and limitations.

Dante Connectivity

Dante Support and IP Configuration

Explains Dante support, IP visibility, device naming, and port usage.

USB X Interface Features

USB Configuration and Functionality

Describes USB port modes, HID mute sync, AEC offloading, and LEDs.

VoIP X Interface

VoIP Features and Troubleshooting

Details VoIP capabilities, security, call instances, and troubleshooting.

Core Processing and I;O

AEC Processing Capabilities

Dedicated AEC hardware per channel; model determines channel count.

Analog I;O and GPIO

Describes analog mic-line inputs/outputs and 4 channels of GPIO.

Installation and Physical Details

Mounting, Cooling, and Bundles

Information on wall mount, cable management, cooling, and hardware bundles.

Software Blocks and Initialization

Block Family and Configuration Options

Introduces block family and configuration options for AEC, VoIP, USB.

System Control and Dante Integration

3 rd-Party Control Systems and Dante

How control systems communicate and Dante integration methods.

System Design and AVB Network Diameter

Larger System Considerations and Hop Limits

Recommendations for larger systems, TC-5, and AVB network diameter limits.

Biamp TesiraFORTE X 400 Specifications

General

AEC Channels	8
Processing Power	400 MIPS
Dante	Yes
Sample Rate	48 kHz
Power Supply	100-240 VAC, 50-60 Hz
Network Protocol	AVB
Network	Ethernet
Control	Ethernet
Mounting Options	Rack mount
Dimensions	19" x 1.75" x 8.5"