Bianchi e-Omnia - Dichiarazione DI Conformità; Avvertenze DI Sicurezza Generali

12
IT
DICHIARAZIONE DI CONFORMITÀ
Il produttore F.I.V.E. Bianchi S.p.A. sito in Via delle Battaglie, 5 - 24047 Treviglio (BG), dichiara che i suoi prodotti sono conformi alle
corrispondenti normativa 2006/42/CE, 2014/30/UE, 2011/65/EU, 2014/53/EU, UNI EN15194:2018 e ISO4210. I prodotti rispondono inoltre a
quanto disposto dall’art. 50 del Codice della strada (decreto legislativo 30 aprile 1992 n. 285 e successive modificazioni, così come innovato
dall’art. 24/1 della legge 3 febbraio 2003 n. 14) così come definiti all’art. 2, comma 1, lettera n dell’Accordo. Al seguente indirizzo web https://
www.bianchi.com/manuals/ alla voce dichiarazione di conformità è possibile consultare l’elenco completo dei codici prodotto e le relative
compatibilità.
AVVERTENZE DI SICUREZZA GENERALI
Prestare particolare attenzione ai seguenti simboli.
PERICOLO!
segnala un possibile pericolo, che se non evitato può comportare la morte o gravi lesioni.
ATTENZIONE!
segnala norme e comportamenti da apprendere per conoscere e utilizzare il prodotto in sicurezza.
INFORMAZIONE/NOTA!
segnala informazioni aggiuntive utili all’uso del prodotto.
ATTENZIONE!
Si precisa che il mancato rispetto delle avvertenze e delle prescrizioni contenute nel presente foglietto illustrativo esime il
produttore da qualsiasi responsabilità
DESTINAZIONE D’USO PRODOTTO OMNIA CTYPE E OMNIA TTYPE
ASTM CATEGORIA 1
Biciclette da corsa, da triathlon e da crono, biciclette a uso ricreativo e city bike comprese le relative versioni a pedalata
assistita e-Bike Pedelec.
Destinate ad essere utilizzate su superfici pavimentate artificialmente quali strade asfaltate e piste ciclabili. Le ruote sono
costantemente a contatto con il suolo.
DESTINAZIONE D’USO PRODOTTO OMNIA XTYPE E OMNIA FXTYPE
ASTM CATEGORIA 3
Mountain bike per cross-country e ciclo escursionismo con forcella ammortizzata comprese le relative versioni a pedalata
assistita e-Bike Pedelec.
Destinate ad essere utilizzate su superfici come da categoria 2 oltre a sentieri escursionistici non pavimentati e con medie
asperità e salti fino a 61 cm (24 pollici).
ATTENZIONE!
Con l’impiego di cavalletti posteriori, parafanghi, portapacchi e rimorchi per biciclette, la destinazione d’uso del modello passa sempre
alla categoria 2 (vedere capitolo destinazione d’uso nel manuale utente).
13 June 2023
C8005092-008
User manual supplement:
e-OMNIA
• Declaration of Conformity
The manufacturer F.I.V.E. Bianchi S.p.A., located at Via delle Battaglie, 5 - 24047 Treviglio (BG), Italy, hereby declares that its products
conform with standards 2006/42/EC, 2014/30/UE, 2011/65/EU, 2014/53/EU, UNI EN15194:2018 and ISO4210. The products also
conform with the provisions of Art. 50 of the Italian Highway Code (Italian Legislative Decree no. 285 of 30 April 1992, as amended,
and as amended by Art. 24/1 of Italian Law no. 14 of 3 February 2003), as defined by Art. 2, paragraph 1, letter (n) of the Agreement.
The complete list of product codes and the relative compliance information can be consulted under the “Declaration of Conformity”
link at https://www.bianchi.com/manuals/ .
• General safety warnings
Please pay close attention to the following symbols.
(symbol)Danger! indicates a potential danger which may cause serious injury or death if not avoided.
(symbol)Warning! indicates practices and conduct to be adopted for safe product use.
(
symbol)Information! indicates additional information on how to use the product.
(symbol)Warning!
Please note that failure to comply with the warnings and provisions contained in this data sheet exempts the manufacturer of any
liability.
• Intended use of the Omnia C-Type and Omnia T-Type
ASTM CATEGORY 1 - Racing, triathlon and time trial bikes, recreational bikes and city bikes including the e-Bike Pedelec versions.
Designed for use on paved surfaces such as asphalt roads and cycleways. The tires remain in constant contact with the ground.
• Intended use of the Omnia X-Type and Omnia FX-Type
ASTM CATEGORY 3 - Mountain bikes for cross-country and cycle touring with suspension fork including the e-Bike Pedelec versions.
Intended for use on category 2 surfaces as well as unpaved hiking trails with medium unevenness and drops up to 61 cm (24 inches).
(symbol)Warning!
With the use of rear stands, mudguards, cargo racks and bicycle trailers, the intended use of the model changes to category 2 (see
the chapter on intended use in the user manual).
• Frame
The frame is made entirely of aluminium, with tubing designed to add sportiness to e-Omnia products. Specifically designed to be
compatible with the motor and integrated battery, mounted in a balanced position to optimise riding agility.
Internal cable housing, casing and brake hoses.
The head tube is designed to house bearings from 1½”.
The frame is compatible with electronic and mechanical (chain and belt) shifting systems.
The frames conform to standard EN15194.
The maximum load capacity of the bike, system weight*, is indicated on the EPAC label, located in the motor housing unit.
13 June 2023
C8005092-008
User manual supplement:
e-OMNIA
• Declaration of Conformity
The manufacturer F.I.V.E. Bianchi S.p.A., located at Via delle Battaglie, 5 - 24047 Treviglio (BG), Italy, hereby declares that its products
conform with standards 2006/42/EC, 2014/30/UE, 2011/65/EU, 2014/53/EU, UNI EN15194:2018 and ISO4210. The products also
conform with the provisions of Art. 50 of the Italian Highway Code (Italian Legislative Decree no. 285 of 30 April 1992, as amended,
and as amended by Art. 24/1 of Italian Law no. 14 of 3 February 2003), as defined by Art. 2, paragraph 1, letter (n) of the Agreement.
The complete list of product codes and the relative compliance information can be consulted under the “Declaration of Conformity”
link at https://www.bianchi.com/manuals/ .
• General safety warnings
Please pay close attention to the following symbols.
(symbol)Danger! indicates a potential danger which may cause serious injury or death if not avoided.
(symbol)Warning! indicates practices and conduct to be adopted for safe product use.
(
symbol)Information! indicates additional information on how to use the product.
(symbol)Warning!
Please note that failure to comply with the warnings and provisions contained in this data sheet exempts the manufacturer of any
liability.
• Intended use of the Omnia C-Type and Omnia T-Type
ASTM CATEGORY 1 - Racing, triathlon and time trial bikes, recreational bikes and city bikes including the e-Bike Pedelec versions.
Designed for use on paved surfaces such as asphalt roads and cycleways. The tires remain in constant contact with the ground.
• Intended use of the Omnia X-Type and Omnia FX-Type
ASTM CATEGORY 3 - Mountain bikes for cross-country and cycle touring with suspension fork including the e-Bike Pedelec versions.
Intended for use on category 2 surfaces as well as unpaved hiking trails with medium unevenness and drops up to 61 cm (24 inches).
(symbol)Warning!
With the use of rear stands, mudguards, cargo racks and bicycle trailers, the intended use of the model changes to category 2 (see
the chapter on intended use in the user manual).
• Frame
The frame is made entirely of aluminium, with tubing designed to add sportiness to e-Omnia products. Specifically designed to be
compatible with the motor and integrated battery, mounted in a balanced position to optimise riding agility.
Internal cable housing, casing and brake hoses.
The head tube is designed to house bearings from 1½”.
The frame is compatible with electronic and mechanical (chain and belt) shifting systems.
The frames conform to standard EN15194.
The maximum load capacity of the bike, system weight*, is indicated on the EPAC label, located in the motor housing unit.