Bianchi e-Omnia - Déclaration de Conformité; Avertissements Généraux de Sécurité

28
FR
DÉCLARATION DE CONFORMITÉ
Le producteur F.I.V.E. Bianchi S.p.A., sis Via delle Battaglie, 5 - 24047 Treviglio (BG), déclare que ses produits sont conformes aux normes
suivantes : 2006/42/CE, 2014/30/UE, 2011/65/UE, 2014/53/UE, UNI EN 15194:2018 et ISO4210. Les produits sont également conformes aux
dispositions de l’article 50 du code de la route (décret législatif n° 285 du 30 avril 1992 et modifications ultérieures, modifié par l’article
24/1 de la loi n° 14 du 3 février 2003), tel que défini à l’article 2, paragraphe 1, point n), de l’Accord.
Le lien suivant https://www.bianchi.com/manuals/ permet de consulter la liste complète des codes produit et les compatibilités
correspondantes, dans la section Déclaration de conformité.
AVERTISSEMENTS GÉNÉRAUX DE SÉCURITÉ
Accorder une attention particulière aux symboles suivants.
DANGER !
signale un danger éventuel, qui peut entraîner des blessures graves, voire mortelles s’il n’est pas évité.
ATTENTION !
signale des normes et des comportements à apprendre pour connaître et utiliser le produit en sécurité.
INFORMATION/REMARQUE !
signale des informations supplémentaires utiles lors de l’utilisation du produit.
ATTENTION !
Le non-respect des avertissements et des indications de ce mode d’emploi dégage le producteur de toute responsabilité.
UTILISATION PRÉVUE DU PRODUIT OMNIA CTYPE ET OMNIA TTYPE
ASTM CATÉGORIE 1
Vélos de course, de triathlon et de contre-la-montre, vélos de loisir et vélos de ville, y compris leurs versions à pédalage
assisté électriques e-Bike Pedelec.
Destinés à être utilisés sur les surfaces avec un revêtement artificiel telles que les routes goudronnées et les pistes
cyclables. Les roues sont constamment en contact avec le sol.
UTILISATION PRÉVUE DU PRODUIT OMNIA XTYPE ET OMNIA FXTYPE
ASTM CATÉGORIE 3
VTT pour le cross-country et le cyclotourisme avec fourche suspendue, y compris leurs versions à pédalage assisté
électriques e-Bike Pedelec.
Destinés à être utilisés sur des surfaces de catégorie 2 ainsi que sur des sentiers de randonnée non goudronnés avec une
rugosité moyenne et des sauts jusqu’à 61 cm (24 pouces).
ATTENTION !
En cas d’utilisation de béquilles arrière, de garde-boue, de porte-bagages et de remorques pour vélos, l’utilisation prévue du modèle
passe toujours à la catégorie 2 (voir le chapitre sur l’utilisation prévue dans le manuel de l’utilisateur).
13 June 2023
C8005092-008
User manual supplement:
e-OMNIA
• Declaration of Conformity
The manufacturer F.I.V.E. Bianchi S.p.A., located at Via delle Battaglie, 5 - 24047 Treviglio (BG), Italy, hereby declares that its products
conform with standards 2006/42/EC, 2014/30/UE, 2011/65/EU, 2014/53/EU, UNI EN15194:2018 and ISO4210. The products also
conform with the provisions of Art. 50 of the Italian Highway Code (Italian Legislative Decree no. 285 of 30 April 1992, as amended,
and as amended by Art. 24/1 of Italian Law no. 14 of 3 February 2003), as defined by Art. 2, paragraph 1, letter (n) of the Agreement.
The complete list of product codes and the relative compliance information can be consulted under the “Declaration of Conformity”
link at https://www.bianchi.com/manuals/ .
• General safety warnings
Please pay close attention to the following symbols.
(symbol)Danger! indicates a potential danger which may cause serious injury or death if not avoided.
(symbol)Warning! indicates practices and conduct to be adopted for safe product use.
(
symbol)Information! indicates additional information on how to use the product.
(symbol)Warning!
Please note that failure to comply with the warnings and provisions contained in this data sheet exempts the manufacturer of any
liability.
• Intended use of the Omnia C-Type and Omnia T-Type
ASTM CATEGORY 1 - Racing, triathlon and time trial bikes, recreational bikes and city bikes including the e-Bike Pedelec versions.
Designed for use on paved surfaces such as asphalt roads and cycleways. The tires remain in constant contact with the ground.
• Intended use of the Omnia X-Type and Omnia FX-Type
ASTM CATEGORY 3 - Mountain bikes for cross-country and cycle touring with suspension fork including the e-Bike Pedelec versions.
Intended for use on category 2 surfaces as well as unpaved hiking trails with medium unevenness and drops up to 61 cm (24 inches).
(symbol)Warning!
With the use of rear stands, mudguards, cargo racks and bicycle trailers, the intended use of the model changes to category 2 (see
the chapter on intended use in the user manual).
• Frame
The frame is made entirely of aluminium, with tubing designed to add sportiness to e-Omnia products. Specifically designed to be
compatible with the motor and integrated battery, mounted in a balanced position to optimise riding agility.
Internal cable housing, casing and brake hoses.
The head tube is designed to house bearings from 1½”.
The frame is compatible with electronic and mechanical (chain and belt) shifting systems.
The frames conform to standard EN15194.
The maximum load capacity of the bike, system weight*, is indicated on the EPAC label, located in the motor housing unit.
13 June 2023
C8005092-008
User manual supplement:
e-OMNIA
• Declaration of Conformity
The manufacturer F.I.V.E. Bianchi S.p.A., located at Via delle Battaglie, 5 - 24047 Treviglio (BG), Italy, hereby declares that its products
conform with standards 2006/42/EC, 2014/30/UE, 2011/65/EU, 2014/53/EU, UNI EN15194:2018 and ISO4210. The products also
conform with the provisions of Art. 50 of the Italian Highway Code (Italian Legislative Decree no. 285 of 30 April 1992, as amended,
and as amended by Art. 24/1 of Italian Law no. 14 of 3 February 2003), as defined by Art. 2, paragraph 1, letter (n) of the Agreement.
The complete list of product codes and the relative compliance information can be consulted under the “Declaration of Conformity”
link at https://www.bianchi.com/manuals/ .
• General safety warnings
Please pay close attention to the following symbols.
(symbol)Danger! indicates a potential danger which may cause serious injury or death if not avoided.
(symbol)Warning! indicates practices and conduct to be adopted for safe product use.
(
symbol)Information! indicates additional information on how to use the product.
(symbol)Warning!
Please note that failure to comply with the warnings and provisions contained in this data sheet exempts the manufacturer of any
liability.
• Intended use of the Omnia C-Type and Omnia T-Type
ASTM CATEGORY 1 - Racing, triathlon and time trial bikes, recreational bikes and city bikes including the e-Bike Pedelec versions.
Designed for use on paved surfaces such as asphalt roads and cycleways. The tires remain in constant contact with the ground.
• Intended use of the Omnia X-Type and Omnia FX-Type
ASTM CATEGORY 3 - Mountain bikes for cross-country and cycle touring with suspension fork including the e-Bike Pedelec versions.
Intended for use on category 2 surfaces as well as unpaved hiking trails with medium unevenness and drops up to 61 cm (24 inches).
(symbol)Warning!
With the use of rear stands, mudguards, cargo racks and bicycle trailers, the intended use of the model changes to category 2 (see
the chapter on intended use in the user manual).
• Frame
The frame is made entirely of aluminium, with tubing designed to add sportiness to e-Omnia products. Specifically designed to be
compatible with the motor and integrated battery, mounted in a balanced position to optimise riding agility.
Internal cable housing, casing and brake hoses.
The head tube is designed to house bearings from 1½”.
The frame is compatible with electronic and mechanical (chain and belt) shifting systems.
The frames conform to standard EN15194.
The maximum load capacity of the bike, system weight*, is indicated on the EPAC label, located in the motor housing unit.