8 USER’S MANUAL
Using your BIBO
Initial connection to an electrical supply
operating correctly. Select your preferred language and then follow the instructions on the screen, adding hot and cold
keys.
Before using your BIBO for the first time
Important:
the hot and cold outlets when the keys are touched, before you switch on the hot water tank.
(see page 4 of this guide for its location). A prompt will appear to check the hot tank is full of water. The hot tank will then
approximately 5 minutes to get up to maximum temperature. The cold tank takes approximately 15 minutes to get to
minimum temperature.
Performance tip:
fast this may reduce the number of consecutive cups of very hot water available in one go.
1.
4.
2.
5.
3.
6.
To Next Page
Loading...