BIC 960 - Page 19

THIS UNIT HAS BEEN SUPPLIED WITH EITHER A SHURE M9IED CARTRIDGE
OR A SHURE M75ECS CARTRIDGE, BOTH CONTAINING AN ELLIPTICAL
STYLUS. THE LABEL ON THE CARTRIDGE BODY WILL IDENTIFY THE
CARTRIDGE MODEL NUMBER.
RECOMMENDED VERTICAL TRACKING FORCE (VTF)* FOR THE M9IED IS
3/4 TO 1 1/2 GRAMS.
RECOMMENDED VERTICAL TRACKING FORCE (VTF)* FOR THE M75ECS IS
1 1/2 TO 3 GRAMS.
NOTE: SET ANTI-SKATE FORCE* SAME AS VTF. EXAMPLE: IF VTF
IS 1 1/2 GRAMS SET ANTI-SKATE TO 1 1/2 GRAMS AND
STYLUS MODE SELECTOR ON THE 960 AND 980 TO ELLIPTICAL.
REPLACEMENT STYLI:
FOR THE M9IED USE SHURE N9IED STYLUS.
FOR THE M75ECS USE SHURE N75ECS STYLUS.
* PLEASE REFER TO THE OWNER’S MANUAL SUPPLIED WITH YOUR UNIT
BEFORE MAKING THE ABOVE ADJUSTMENTS.