Bicycles4u EVORA - Step by Step instructions for folding and assembling; Steps to fold the bike; Steps to unfold the bike; How to Ride the Electric Bike

Step by Step instructions for folding and assembling
1) Remove the safety catch then loosen the quick release. (for handlebar stem).
2) Fold the stem towards the left.
3) Pull the trigger of the pedal and fold it downwards simultaneously.
4) Remove the safety plug then loosen the quick release. (for frame)
5) Fold the bicycle inwards
6) Finished
1) Unfold the front and rear frame.
2) Lock the quick release handle in place and tight it in securely.
3) Lift up the handlebar stem.
4) Lock the quick release and safety plug of the quick release.
5) Pull the trigger of the pedal and unfold the pedal upwards simultaneously
6) Finished
1
2
3
5
4
1
2
3
4
5
Steps to fold the bike
Steps to unfold the bike
Turn the power ON
Use the key to turn on the power switch. Turn the throttle slowly to drive the bike forward.
The remaining battery power is displayed on the panel after turning the power on.
Power cut during braking
To ensure the rider’s safety, the motor will stop working when braking and restart after the brake
lever is released.
Riding
Test each of the functions before riding to get used to the functions of the e-bike like, controlling
the brake, throttle and handlebar.
Turn the throttle slowly, then sit back and enjoy the ride.
Every cyclist should obey the traffic rules.
How to Ride the Electric Bike