Bicycles4u EVORA - Adjust the derailleur; Brakes; Warranty; When does the warranty not apply?

Adjust the derailleur
Adjust the Fine-tuning nut or screw when the derailleur makes some abnormal sound. The way to adjust the
brake of the bike is the same as adjusting the gears. The most important thing is effective braking, releasing
of the brake pads and the power brake function work well together. Friction between road and tyre is reduced
when raining, so every rider should brake gently in order to avoid danger. Please follow the several bits of
advice given, every screw and nut should be tightened properly to make sure the wheel is running freely with
no resistance.
Brakes
The brake-shoes which are fixed on the V-brake and roller-brake wear out in time causing
gap widening between the brake-shoes and the rim flank. This is indicated by the increase
of the leeway of the brake lever.
The left brake lever controls the rear and
the right brake lever controls the front brake.
You can modify it by adjusting the brake system
through the following steps:
Simply turn the adjusting screw on the brake
lever until the gap between the brake shoes and
the rim flank averages about 1.5-2 mm.
Adjust the brakes correctly by tightening or loosening
the crosshead screws on the side of the brake arms, until the brake shows are centered to
the rim. Through tightening of the screws, the spring will be prestressed and the brake-shoe
will move away from the rim.
Warranty
NAME
FAULT
WARRANTY PERIOD
Frame
Fracture, sealing off, or
open solder
one year
Front Fork
Fracture, sealing off, or
open solder
one year
Handlebar, Stem and
Accessories
Fracture
one year
Spindle and Parts
Heat treatment parts
damaged or broken
one year
Seat Post
Fracture
one year
Transmission, Shift Lever
and Brake Lever
Fracture, broken
one year
Rim
Cracking
one year
Shaft skin, Flywheel, Gear,
and Crank
Fracture
one year
Chains, Mudguard, Hanger
and Kickstand
Fracture
one year
Speed control switch to,
Controller and Charger
Performance Failure
one year
Brush motor
Performance Failure
one year
Brushless motor
Performance Failure
one year
Battery
failure
one year
When does the warranty not apply?
?When the bicycle is used negligently or has damage resulting from a traffic accident.
?Normal wear and tear.
?Poor maintenance or modifications that no longer complies with regulations or original specifications.
?Damage due to external causes.
?When the bicycle is used for rental.
?Compensatory costs arising from damages or accidents, or cost incurred by loss of the bicycle’s usage.
?Bulbs, brake blocks, tyres etc. - Are regarded consumables, therefore when replacements are required,
these need to be purchased from your local cycle shop or store.