EasyManua.ls Logo

Bidex 500 - Fitting Instructions; Step 1 Location; Step 2 Central Heating Water Supply; Step 3 Electrical Supply

Default Icon
6 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Fitting Instructions
The following items should be included in the box
1/ Heater unit
2/ 2 x flexible hose with isolation valves
3/ Facia grills with fixing screw pack
4 / instruction manual
Step 1 Location
Select a location in a cavity beneath a kitchen cupboard ensuring the area is clean
and level. Care should be taken not to store perishable goods in the cupboard directly
above the heater unit
Step 2 Central heating water supply
Supply should be through a 2 15mm pipe pumped central heating system
Step 3 Electrical supply
Warning: This application must be earthed
A fused (3amp) electrical spur with a switch should be fitted in an easily accessible
position. Do not locate the spur immediately above the heater
Note: Electrical installation must comply with local or national regulations
1