BIEMMEDUE Ballu BM2 GE 36 User Manual (English)

Questions and Answers:

M
Ms. Alicia Estrada DDSAug 11, 2025
Why is my BIEMMEDUE Ballu BM2 GE 36 generating fumes?
- K
  Kevin RobinsonAug 11, 2025
  If your BIEMMEDUE Heater is generating fumes, it could be due to several reasons: * Insufficient combustion air: Make sure the air inlet and outlet are free. * Excess combustion air: Check the position of the air regulation ring. * Fuel contaminated or contains water: Drain the fuel tank and refill it with clean fuel. * Air leaks in the fuel circuit: Check the seals on the ducts and the diesel filter. * Insufficient fuel at burner or excess fuel at burner: Check the pump pressure.
A
Angela PollardAug 17, 2025
What to do if the fan on my BIEMMEDUE Heater doesn't start or stops?
- J
  Jonathan RamirezAug 17, 2025
  If the fan on your BIEMMEDUE Heater isn't starting or stops, here are a few things to check: * No electrical current: Check the mains. * Voltage below 175V: The heater will restart automatically when voltage exceeds 190 V. Check the supply voltage. * Voltage above 265V: The heater will restart automatically when voltage is below 250 V. Check the supply voltage.
D
davisstacyAug 28, 2025
How to fix a BIEMMEDUE Ballu BM2 GE 36 Heater when the motor doesn't start and there is no ignition?
- L
  Lucas ValdezAug 29, 2025
  If the motor of your BIEMMEDUE Heater doesn't start and there is no ignition, it could be due to: * Wrong setting of room thermostat or other control: Check the correct setting of the heater control. If it's a thermostat, ensure the selected temperature is higher than the room temperature. * Defective thermostat or other control: Replace the control device.
J
John ValenzuelaSep 4, 2025
What to do if my BIEMMEDUE Ballu BM2 GE 36 Heater does not stop?
- D
  dthompsonSep 4, 2025
  If your BIEMMEDUE Heater does not stop, it may be due to a defective solenoid seal. In this case, replace the complete solenoid.