BIEMMEDUE BH 100 User Manual (English)

Questions and Answers:

V
veronicahebertAug 7, 2025
What to do if my BIEMMEDUE BH 100 doesn't start but the lamp is on?
- A
  Andrew AyalaAug 7, 2025
  If your BIEMMEDUE Heater's lamp is on but it's not starting, here's what you can check: * Ensure switch (a) is in the correct position. * Verify that the thermostat connection plug is properly inserted and adjust the thermostat setting if needed. * If it's a gas heater, make sure the gas feed pipe has been bled and check the gas feed pressure, as the gas pressure switch may have tripped.
C
Candice Jones MDAug 11, 2025
Why does the lamp flash on my BIEMMEDUE BH 100 and it doesn't work?
- F
  fwyattAug 11, 2025
  If the lamp on your BIEMMEDUE Heater is flashing and it's not working, it's likely due to insufficient electrical supply (V < 190V). The heater should restart automatically when sufficient voltage is restored (V>190V). If the heater starts and stops several times, or if it doesn't start at all and remains in safety stop, check the power line.
D
Daniel PalmerAug 17, 2025
How to fix a BIEMMEDUE Heater that doesn't start and the lamp is off?
- F
  Frederick RoblesAug 17, 2025
  If your BIEMMEDUE Heater isn't starting and the lamp is off, it indicates a power supply issue. You should: 1. Check the functioning and position of the switch. 2. Check the mains. 3. Check the power connections. 4. Check the fuse.
J
Joseph TaylorAug 21, 2025
Why is my BIEMMEDUE BH 100 working erratically and the burner keeps going on and off?
- C
  Carrie CunninghamAug 21, 2025
  If your BIEMMEDUE Heater is working erratically, with the burner going on and off alternately and the lamp also going on and off, it could be due to: * Issues with gas flow: Check and clean the gas filter; clean and recalibrate the burner. * The burner thermostat tripping due to overheating: Check the position of air distribution channels and ensure any flaps or openings are correctly positioned. Also, remove any foreign bodies trapped in the air ducts or ventilation grilles.
S
scott45Aug 27, 2025
What to do if BIEMMEDUE BH 100 doesn't work but the lamp is on?
- P
  Peter NelsonAug 27, 2025
  If your BIEMMEDUE Heater isn't working but the lamp is on, it suggests the manual reset safety thermostat has tripped because of excessive overheating in the combustion chamber. Here’s what to check: * Ensure the fan motor starts correctly and isn't obstructed. * Verify the fan motor isn't burned out and the motor condenser isn't broken. * Check the burner calibration and the chimney for proper fume discharge.
K
Kevin GibsonSep 1, 2025
How to reduce noise and vibration in my BIEMMEDUE BH 100 Heater fan?
- T
  Tony ElliottSep 1, 2025
  If the fan in your BIEMMEDUE Heater is noisy or vibrating, it could be due to dirt on the fan blades. Remove any dirt. Also, ensure there is good air circulation by eliminating any obstacles to the airflow.

BIEMMEDUE BH 100 Specifications

General

Frequency	50/60 Hz
Weight	34 kg
Thermostat	Yes
Fuel	Kerosene
Power supply	230V
Dimensions	1070 x 450 x 560 mm
Power	0.55 kW
Voltage	230 V
Safety Features	Overheat protection