EasyManua.ls Logo

BIEMMEDUE BH 50 - User Manual

BIEMMEDUE BH 50
16 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
L-L 195.00-BM 1 / 60
MANUALE D’USO E MANUTENZIONE
MANUEL D'INSTRUCTIONS
BETRIEBSANLEITUNG
INSTRUCTIONS MANUAL
MANUAL DE INSTRUCCIONES
РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ И ТЕХОБСЛУЖИВАНИЮ
GENERATORE D'ARIA CALDA
GENERATEUR D'AIR CHAUD
WARMLUFTERZEUGER
SPACE HEATER
GENERADOR DE AIRE CALIENTE
ТЕПЛОВОЙ ГЕНЕРАТОР
BH 50 – BH 100
GAS
IT
FR
DE
EN
ES
RU

Questions and Answers

  • A
    Alisha JacksonAug 1, 2025
    What to do if my BIEMMEDUE Heater doesn't start but the lamp is on?
    • S
      Stephen JohnstonAug 1, 2025
      If your BIEMMEDUE Heater's lamp is on but it's not starting, here's what you can check: * Ensure switch (a) is in the correct position. * Verify that the thermostat connection plug is properly inserted and adjust the thermostat setting if needed. * If it's a gas heater, make sure the gas feed pipe has been bled and check the gas feed pressure, as the gas pressure switch may have tripped.
  • B
    Brian MorganAug 6, 2025
    Why does the lamp flash on my BIEMMEDUE BH 50 and it doesn't work?
    • J
      Jennifer GomezAug 6, 2025
      If the lamp on your BIEMMEDUE Heater is flashing and it's not working, it's likely due to insufficient electrical supply (V < 190V). The heater should restart automatically when sufficient voltage is restored (V>190V). If the heater starts and stops several times, or if it doesn't start at all and remains in safety stop, check the power line.
  • J
    James MorganAug 12, 2025
    How to fix a BIEMMEDUE Heater that doesn't start and the lamp is off?
    • T
      timothy83Aug 12, 2025
      If your BIEMMEDUE Heater isn't starting and the lamp is off, it indicates a power supply issue. You should: 1. Check the functioning and position of the switch. 2. Check the mains. 3. Check the power connections. 4. Check the fuse.
  • D
    David ReyesAug 16, 2025
    Why is my BIEMMEDUE BH 50 Heater working erratically and the burner keeps going on and off?
    • R
      raymond08Aug 16, 2025
      If your BIEMMEDUE Heater is working erratically, with the burner going on and off alternately and the lamp also going on and off, it could be due to: * Issues with gas flow: Check and clean the gas filter; clean and recalibrate the burner. * The burner thermostat tripping due to overheating: Check the position of air distribution channels and ensure any flaps or openings are correctly positioned. Also, remove any foreign bodies trapped in the air ducts or ventilation grilles.
  • X
    xnguyenAug 21, 2025
    What to do if BIEMMEDUE Heater doesn't work but the lamp is on?
    • A
      Austin FloresAug 21, 2025
      If your BIEMMEDUE Heater isn't working but the lamp is on, it suggests the manual reset safety thermostat has tripped because of excessive overheating in the combustion chamber. Here’s what to check: * Ensure the fan motor starts correctly and isn't obstructed. * Verify the fan motor isn't burned out and the motor condenser isn't broken. * Check the burner calibration and the chimney for proper fume discharge.
  • C
    Christina MoralesAug 27, 2025
    How to reduce noise and vibration in my BIEMMEDUE BH 50 Heater fan?
    • A
      Anthony GomezAug 27, 2025
      If the fan in your BIEMMEDUE Heater is noisy or vibrating, it could be due to dirt on the fan blades. Remove any dirt. Also, ensure there is good air circulation by eliminating any obstacles to the airflow.

Summary

Declaration of Conformity

Conformity Statement Details

Multilingual confirmation of product compliance with essential safety requirements.

Product Information and General Advice

Product Description

Details on the space heater's design, functionality, and fuel types.

Conditions of Supply

Information regarding the packaging and handling of the space heater.

General Advice

Guidelines for safe and compliant installation, operation, and maintenance.

Installation Instructions

Installation on Floor or Ceiling

Requirements for mounting the heater on a base or suspending it.

Power Connections

Procedure for electrical connection, including earthing and circuit breaker.

Connection to Hot Air Delivery Ducts

Guidance on connecting the heater to air distribution channels.

Connection to Fuel Supply

Steps for connecting the gas supply pipe and ensuring proper sealing.

Connecting Burner to Air Intake

Instructions for connecting the burner's air intake to ensure clean air supply.

Connection to Exhaust Duct

Requirements for connecting the exhaust duct and ensuring proper flue draft.

First Start-Up

Procedure for initial startup, including fuel type and category checks.

Regulating Combustion

Adjusting burner settings for optimal combustion and analyzing products.

Operating Instructions

Starting the Heater

Steps to initiate the heater's operation sequence.

Stopping the Heater

Procedure for safely shutting down the heater.

Ventilation Mode

Instructions for running the heater in continuous ventilation mode.

Maintenance

Checking Heater and Gas Supply

Routine checks for the heater and gas supply line integrity.

Cleaning Exterior and Components

Cleaning the heater's exterior, motor, fan, and electrical connections.

Checking and Testing the Burner

Procedures for accessing, checking, and cleaning the burner.

Checking Thermostats

Inspection of fan thermostat and manual reset safety thermostat.

Cleaning Interior and Combustion Chamber

Thorough cleaning of the heater's interior and combustion chamber.

Troubleshooting

Fault Diagnosis and Remedies

Identifying common faults, causes, and recommended solutions.

Technical Information

Electrical Wiring Diagram

Schematic representation of the heater's electrical connections.

Technical Specifications BH 50

Detailed technical data for the BH 50 model.

Technical Specifications BH 100

Detailed technical data for the BH 100 model.

BIEMMEDUE BH 50 Specifications

General IconGeneral
Fuel typeDiesel
Power supply220-240 V
Frequency50/60 Hz
Dimensions1070 x 500 x 610 mm
Weight35 kg
ThermostatYes
Safety FeaturesOverheat protection
Power4.5 kW

Related product manuals