18
USA
PROGRAM SELECTION /
PROGRAM CANCEL KEY
Select the desired program using the
“program selection keys” and press the
button.
To cancel the running program, open the
door of the machine and press and hold
the Program Start/Pause/Cancel key for 3
seconds.
After the 3 - 2 - 1 countdown, 0:01 is
displayed, close the door of the product
and wait for the draining process complete.
Draining is completed in 2 minutes and the
machine gives an audible warning when it
is completed.
FUNCTION KEYS
If you press any of the Function keys
during program selection or time delay
selection, an affirmative key signal will be
heard provided that the relevant function
is supported by the selected program.
Function will be deemed selected when the
indicator of the selected function is lit.
To cancel the selected function, keep the
function key pressed until the function
indicator disappears.
PREPARING THE MACHINE
1. Open the door of the dishwasher.
2. Place the dishes in accordance with the
instructions in the user manual.
3. Make sure that the upper and lower
impellers rotate freely.
4. Put adequate amount of detergent
into the detergent dispenser.
PROGRAM SELECTION
1. Press the On/Off button to turn on
your machine.
2. Check the Salt and Rinse Aid indicators
and add salt and/or rinse aid if needed.
3.
Refer to the table of "Program data
and average consumption values" to
determine a washing program suitable
for your dishes.
4. Selected program will start when you
close the door of your machine.
To Next Page