Big Chill BC24DW - Additional Functions

20
USA
ADDITIONAL FUNCTIONS
Washing programs of the machine are
designed to achieve the best cleaning
performance by considering the soil level,
the amount of dirt and the characteristics
of the dishes to be washed in the machine.
Additional functions have been added
to help you save time, water and energy
and to perform a more hygienic and
comfortable washing, thanks to the
customized features settings.
Additional functions may change the
duration of the selected program.
Additional functions are not suitable
for all washing programs. The indicator
of the function that is not suitable for
the program will not be active.
Functions that can be used in washing
programs are shown with letters
such as " A,B,D,E,G,F,K..." in the
"Program information and average
consumption values table. You can
find instructions on the use of these
functions in the "Additional functions"
section of the user manual.
Some auxiliary functions cannot be
used together. If the function you
selected is not active even though it
appears in the "Program information
and average consumption values
table", you can activate it after turning
off the other auxiliary functions.
To add addtonal functons to the
program:
1. Select the desired washing program.
2. When you select an additional function,
the indicator of the additional function
lights up. When you press the function
button again, the indicator turns off
and the selection is cancelled.
If your machine has sub-menu
functions depending on the model,
see the instructions in the additional
functions section for their use.
Fast+ Functon (F)
(depends on the model)
By enabling the selected program to wash
at higher pressure and temperature, it
shortens the washing time and reduces the
amount of water.
Santze Functon
Sanitize function raises the water
temperature in the final rinse to meet the
requirements of NSF/ANSI STANDARD
184 for Residential Dishwashers. Certified
residential dishwashers are not intended
for licensed food establishments.
At the end of a succesfull sanitization
“SAN“ is displayed on the display.
“SAN” is not displayed on the display
if the cycle is interrupted or the water
could not be heated to the required
temperature.
Available programs are indicated on
Program Table chart.
Note: Only sanitizing cycles have been
designed to meet the requirements
of NSF/ANSI Standard 184 for soil
removal and sanitization efficacy.
There is no intention, either directly or
indirectly, that all cycles have passed
sanitization performance tests.
TurboWash Functon (U)
(depends on the model)
In the selected program, the lower impeller
is operated at higher pressure to provide
an advantage in washing dishes with hard-
to-clean dried dirt such as pots and pans
placed in the lower basket.
Extra Dryng Functon (E)
(depends on the model)
This function enables high level of drying
performance. It can extend the duration of
the selected program up to 30 minutes.