28
USA
3. Slightly press the point (B) of the
reservoir lid to close it.
4. If there are stains on tableware items
after washing, level must be increased
and if there is a blue trace after wiping
them by hand, it must be decreased.
This is set to position 3 as factory
default.
The rinse aid adjustment is described
under “Adjusting the amount of rinse
aid” in the section for operating the
machine.
Wipe clean any spilled rinse aid outside
the reservoir. Rinse aid that spilled
accidentally will cause foaming and
it will eventually decrease washing
performance.
To Next Page