To Next PageTo Next PageWhat to do if BIG RED JACKS Jack will not hold load?
If your BIG RED JACKS jack won't hold the load, it might be due to several reasons. First, ensure that you have not exceeded the weight capacity. Another possible cause is a low oil level; if this is the case, add oil as needed. Finally, a malfunctioning power unit could also be the culprit, in which case you should replace it.
Why BIG RED JACKS Jack will not lift to full extension?
If your BIG RED JACKS jack won't lift to its full extension, the issue might stem from a few causes. Check if you've exceeded the weight capacity. Also, air in the hydraulics could be the problem, so try purging the air from the system. A low oil level could also be the reason, so add oil as required. Lastly, the power unit might be malfunctioning, in which case you should replace it.
How to fix poor lifting of BIG RED JACKS T815005L?
If your BIG RED JACKS jack has poor lifting performance, it could be due to a low oil level. In this case, add oil as required. Alternatively, the power unit might be malfunctioning, and you may need to replace it.
General| Type | Hydraulic Trolley Jack |
|---|---|
| Model | T815005L |
| Category | Jacks |
| Brand | BIG RED |
| Maximum Height | 18.5 inches |
| Lifting Capacity | 3 Ton (6000 lbs) |
Key safety points and precautions for operating the jack safely.
Procedure for inspecting the jack for damage, wear, and proper lubrication before use.
Clarifies the jack's purpose and restrictions, emphasizing it's for lifting only.
Emphasizes the absolute necessity of using jack stands for load support.
Details numbered safety warnings and guidelines for safe operation.
Covers positioning, surface requirements, load centering, and avoiding specific bumper types.
Emphasizes using jack stands, not overloading, not using for stabilization, and general alertness.
Details operator training, spectator safety, pre-use inspection, and additional notes.
Step-by-step instructions for safely lifting a vehicle using the jack.
Guidance on inspecting for damage, cleaning, and preventing rust on the jack.
Details on proper lubrication schedule, grease fittings, and jack storage.
Explanation of how the jack operates and troubleshooting binding issues.
