BIG RED JACKS T82002 User Manual (English)

Questions and Answers:

P
progersJul 28, 2025
What to do if my BIG RED JACKS jack will not lift the load?
- R
  Rebecca ComptonJul 28, 2025
  If your BIG RED JACKS jack isn't lifting, several factors could be at play. First, ensure the release valve is completely closed by turning the handle clockwise. It's also possible the weight capacity has been exceeded. Air in the hydraulics can also cause this issue, so try purging the air from the system. Check the oil level and add oil if it's low. A binding jack or foreign obstruction could be the cause. In some cases, a malfunctioning power unit may need replacement.
M
Mary SimonAug 3, 2025
What to do if my BIG RED JACKS jack will not hold the load?
- A
  Alice HessAug 4, 2025
  If your BIG RED JACKS jack fails to hold a load, make sure the release valve is completely closed by turning the handle clockwise. Also, check the oil level and add oil as needed. If these steps don't resolve the issue, the power unit may be malfunctioning and require replacement.
S
Shannon DavisAug 9, 2025
Why my BIG RED JACKS jack will not lift to full extension?
- M
  Morgan BrownAug 9, 2025
  If your BIG RED JACKS jack isn't reaching its full extension, it could be due to a low oil level, so add oil as required. Another potential cause is air in the hydraulics; in this case, purge the air from the system. Also, the jack might be binding or there could be a foreign obstruction.
D
Donald CohenAug 15, 2025
Why is my BIG RED JACKS jack lifting poorly?
- T
  Tristan RiceAug 16, 2025
  Poor lifting performance in your BIG RED JACKS jack can stem from a few reasons. Check the oil level and add oil if it's low. Air in the hydraulics might be the culprit, so purge the air from the system. It's also possible the jack is binding or there's a foreign obstruction.