EasyManuals Logo

BIGTREETECH MINI12864 V2.0 User Manual

BIGTREETECH MINI12864 V2.0
8 pages
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
Shenzhen Big Tree Technology Co., Ltd.
BIGTREETECH
8 / 8
[neopixel btt_mini12864]
pin: EXP1_6
chain_count: 3
color_order: RGB
initial_RED: 0.4
initial_GREEN: 0.4
initial_BLUE: 0.4
Cautions
Ensure that the power is turned off when wiring. Turn on the power only after checking
the correct connection of the cables and the driver to prevent the board and screen from
being burnt due to incorrect wiring, causing unnecessary costs.
If you need other resources for this product, please visit https://github.com/bigtreetech/ and find
them yourself. If you cannot find the resources you need, you can contact our after-sales support.
If you encounter other problems during use, feel free to contact us, and we are answering them
carefully; any good opinions or suggestions on our products are welcome, too and we will
consider them carefully. Thank you for choosing BIGTREETECH. Your support means a lot to us!

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the BIGTREETECH MINI12864 V2.0 and is the answer not in the manual?

BIGTREETECH MINI12864 V2.0 Specifications

General IconGeneral
BrandBIGTREETECH
ModelMINI12864 V2.0
Category3D Printers
LanguageEnglish