深圳市必趣科技有限公司
BIGTREETECH
6 / 6
#define ADVANCED_PAUSE_FEATURE // retraction setting of nozzle park
movement and filament purge distance after the print is resumed.
3. RRF
M591 D0 P7 C"e0stop" L2.88 R75:125 E9 S1; accuracy of motion sensor is
2.88mm, motion sensor pin: e0stop
Caution
1) Power supply: 3.3V or 5V, please note that any higher voltage will cause
damage.
2) The housing can be damaged if quick connectors are tightened frequently or
incorrectly.
3) To connect to a motherboard without filament runout port, please consult our
technical support.
To Previous Page
Loading...