bihl+Wiedemann BWU3683 User Manual

Subject to technical modifications; no responsibility is accepted for the accuracy of this information
© Bihl+Wiedemann
GmbH
1
Internet: www.bihl-wiedemann.de • Flosswoerthstr. 41 • D-68199 Mannheim
phone: +49 621 33 996-0 • fax: +49 621 33 922 399
Ausgabedatum: 13.02.2019
ASi-3 CIP Safety über EtherNet/IP + ModbusTCP Gateway
Montageanweisung // Commissioning Instructions // ...
Montageanweisung // Installation Instructions // Notice de montage //
Istruzioni per il montaggio // Instrucciones de montaje
BWU3683
ASi-3 CIP Safety über EtherNet/IP+Modbus TCP Gateway mit integr. Sicherhe-
itsmonitor //
ASi-3 CIP Safety over EtherNet/IP+Modbus TCP-Gateway with integr. Safety
Monitor //
Passerelle ASi-3 CIP Safety via EtherNet/IP+Modbus TCP + moniteur de sécu-
rité intégré //
Gateway ASi-3 CIP Safety sulla EtherNet/IP+Modbus TCP con monitor di
sicurezza integrato //
Pasarela ASi-3 CIP Safety a vía de EtherNet/IP+Modbus TCP + monitor de
seguridad integrado
(Abbildung ähnlich // figure similar // figure similaire // figura simile // figura similar)
Das Gerät beherrscht mehrere Protokolle! Wählen Sie bitte bei der Inbetriebnahme
eines der beiden Protokolle aus. // The device handels multiple protocols! Please se-
lect one of them during the initial operation. // L'appareil maîtrise plusieurs de proto-
coles! Veuillez choisir à la première mise en service l’une des deux protocoles. // Lo
strumento parla due protocolli. Si prega di selezionare alla prima messa in servizio
uno dei due protocolli. // El dispositivo maneja varios protocolos! Por favor selecci-
one uno de los dos protocolos durante la puesta en marcha.
Login:
https://www.bihl-wiedemann.de
download
Anleitung lesen:
Bevor Sie mit dem Gerät arbeiten: Lesen Sie diese Anleitung komplett durch. Alle Sicherheitshinweise und
Vorgaben des Gerätehandbuchs und des Handbuchs zur Konfigurationssoftware sind einzuhalten! //
Read instruction:
Before working with this unit: read these instructions carefully and completely. All notes on safety and speci-
fications of the device manual and the manual for the configuration software are to be considered! //
Lire les instructions:
Avant de travailler avec ce module, veuillez lire l’intégralité de ces instructions. Observez les consignes de
sécurité et les instructions du manuel d’utilisation de l’appareil et du guide utilisateur du logiciel de
configuration. //
Leggere attentamente le istruzioni:
Prima di iniziare a operare sull'apparecchio, leggere attentamente le seguenti istruzioni. Si prega di tenere
conto anche delle indicazioni di sicurezza e delle istruzioni del manuale d’uso dell’apparecchio e del man-
uale per l’utente per il software di configurazione. //
Lea las instrucciones:
Antes de trabajar con el equipo lea por completo el manual de instrucciones. Todas las notas de seguridad
y especificaciones del manual del equipo y del manual del software de configuración deben ser respetadas.

bihl+Wiedemann BWU3683 Specifications

General

Type	Gateway
Product type	AS-Interface Gateway
Manufacturer	bihl+Wiedemann
Part Number	BWU3683
Communication Protocol	AS-Interface
Protocols	AS-Interface
AS-Interface	Yes
Power Supply	24 V DC
Protection Class	IP20

Summary

Safety Notes and Warnings

General Installation Safety

Ensures proper installation by qualified personnel and separation of lines.

Hazardous Voltage and Personal Protection

Instructions for handling hazardous voltage and the device's person protective function.

Device Identification and Indicators

Front View and Connections

Diagrams identifying device features and external connection points.

LED Status Indicators

Detailed descriptions of LED functions and their meaning for device status.

Installation and Electrical Setup

Device Dimensions and Mounting

Specifications for device size, mounting options, and installation orientation.

Electrical Installation Details

Wiring guidelines for power supply, system ground, and ASI circuits.

Environmental and Cable Requirements

Ambient temperature limits and cable temperature rating for proper operation.

Commissioning and Configuration

Initial Device Commissioning

Steps for initial setup, changing display modes, and protocol selection.

Ethernet and Watchdog Settings

Configuring Ethernet properties, IP addresses, and the watchdog timer.

ASi Slave Connection and Management

Procedure for connecting and addressing ASi slaves.

Connection Examples and Network Structure

Ideal ASi Network Structure

Diagram illustrating the model structure of an ASi network.

Input and Output Connections

Examples for connecting floating, antivalent contacts, contactors, and OSSDs.

Speed Monitor and Configuration Examples

Wiring for speed monitors and configuration of outputs as inputs.

ASIMON360 Software and Safe Link

Safe Configuration with ASIMON360

Step-by-step guide for safe configuration using the ASIMON360 software.

Safe Link Communication Setup

Instructions for setting up Safe Link communication via Ethernet.

Error Handling and Maintenance

Faulty Slave Identification

Methods for identifying faulty ASi slaves through device display codes.

Error Display and Host Connection Status

Interpreting device error messages and checking host connection status.

Replacing Defective Slaves and Devices

Procedures for replacing faulty ASi slaves and the main device.

Chip Card Replacement and Safe Link Teaching

Steps for replacing chip cards and teaching Safe Link after device replacement.

Product Overview

AS-i Masters and Modules

Catalog of ASi Masters, Digital Modules, and Analog Modules.

Circuit Boards, Drives, and Extensions

Overview of circuit board modules, drive solutions, and circuit extension accessories.

Power Supplies and Safety Components

Information on power supplies and safety monitors/I/O modules.