EasyManua.ls Logo

Billi Quadra Plus - Filter Change Due Monitor; Replacement of Filter Cartridges

Billi Quadra Plus
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
—Filter Change Due Monitor
The Quadra filter change due monitor
operates by counting the number of cups
dispensed and the number of days elapsed
until a pre-set level is reached. Once reached,
the dispenser icons will briefly change to
orange once every five seconds. The Quadra
will continue to operate while the filter
indicator is flashing. Water filters installed
in areas with higher levels of turbidity
(cloudiness/sediment) will experience
a reduced service life. The flow from the
cold water outlet will decrease as the filters
become blocked. It may be necessary to
change filters before the change filter
indicator flashes. The filter monitor can
be reprogrammed to an appropriate service
interval if required. Contact Billi Pty Ltd.
Standard 5 micron-rated filters generally
have a longer service life than Premium
sub micron-rated filters.
If particularly dirty water is noticed coming
through the water supply, e.g. from other tap
ware, as sometimes occurs following repairs
to local water mains, immediately turn your
Billi Quadra o using the ON/OFF button.
This will help prevent premature blocking
of the filter cartridges.
—Replacement of Filter Cartridges
Periodic replacement of your Billi Quadra’s
Water Filter Cartridges is necessary to
maintain the sparkling cleanliness and
purity of your drinking water.
A replacement filter change service is
available. To arrange, contact the Billi
Service centre on 1800 812 321.
If you wish to install the replacement filter
cartridges yourself, filters can be purchased
online at www.billi.com.au or through a
certified agent which will provide genuine
Billi replacement filter cartridge sets.
To assist with the replacement of your Quadra
filter cartridges, a series of moving graphic
instruction screens will guide you through the
required steps. Press HELP if display indicates
‘Filter Change Due’ or refer to Options, page 10
mode to select ‘Filter Change Help’.
8
User guide
Billi Quadra & Quadra Plus.
Filter
Type
Order
Part No. Suits Micr. Filters Sediment Chlorine VOCs Chemicals
Taste
Odour
Fluoride
Minerals
Expected
Life
Prem. 990413
Quadra
Compact
sub Single
Slight
6 - 12
months
Stand. 990402
Quadra
Compact
5 Single
6 - 12
months
Prem. 990414
Quadra
420-4180
Quadra
Plus
sub Dual
Slight
6 - 12
months
Stand. 990412
Quadra
420-4180
Quadra
Plus
5 Dual
6 - 12
months
Billi Filter Cartridges – Reduces & Removal
Once new filter(s) have been installed and
the filter flush cycle is complete, check for
any water leakage around the filter system. Take
particular care to ensure the area around the
water leakage sensor, located on the
lower left hand side of the bulkhead behind
the filters, is dry. If you have any questions,
or concerns during the filter change process
simply contact Billi’s experienced technical
assistance team on 0800 636-0-636.

Other manuals for Billi Quadra Plus

Related product manuals