1. Beacon Interval
This filed indicates the interval between each beacon that this AP sends out
in unit of TU (1024 micro-seconds).
2. DTIM Period
The DTIM Period field is the number of Beacon intervals between successive
DTIMs.
3. Preamble Mode
■ Long: higher quality but with lower performance
than preamble short mode.
■ Short: Normal quality but with higher
performance then preamble long mode.
■ Auto: select the proper preamble mode by
current signal frame information.
C. Statistics Page
The Tx/Rx status of current wireless connection is shown. A statistic analysis of
packet transition is listed.
23
To Next Page
Loading...
