How to start a Billy Goat Vacuum Cleaner that won't start?
If your Billy Goat Vacuum Cleaner engine won't start, check the following: * Ensure the throttle is not in the off position. * Confirm the engine is in full choke position. * Make sure there's gasoline in the tank, and that it's not old or bad. * Ensure the spark plug wire is connected. * Check if the air cleaner is dirty and clean or replace it if necessary.
Why is my Billy Goat Vacuum Cleaner vibrating so much?
Abnormal vibration in your Billy Goat Vacuum Cleaner may be due to a loose or out-of-balance impeller, or a loose engine. Check the impeller and replace it if required. Also, check the engine.
What to do if Billy Goat Vacuum Cleaner nozzle scrapes the ground?
If the nozzle of your Billy Goat Vacuum Cleaner scrapes the ground even at the highest setting, it's likely that the nozzle height is out of adjustment. Adjust the nozzle height.
What causes a Billy Goat Vacuum Cleaner self-propelled drive to not release?
If your Billy Goat Vacuum Cleaner's self-propelled drive won't release, the drive clutch cable adjustment may be improper, or the cable could be kinked. Check the drive clutch cable.
Why is my Billy Goat Vacuum Cleaner not self-propelled?
If your Billy Goat Vacuum Cleaner is not self-propelling, make sure the drive bail is engaged. Also, check the drive belt, the drive clutch cable, and the drive chain.
How to fix a noisy chain on a Billy Goat Vacuum Cleaner?
If the chain on your Billy Goat Vacuum Cleaner is noisy or broken, it could be due to a lack of lubrication, chain misalignment, or tension issues. Lubricate the chain and check the drive chain.
General| Brand | Billy Goat |
|---|---|
| Model | KV650SPH |
| Category | Lawn and Garden Equipment |
| Language | English |
To Next Page
