Why does my Billy Goat Lawn and Garden Equipment vibrate excessively?
Excessive vibration in your Billy Goat Lawn and Garden Equipment could be caused by a damaged belt, so you should replace it. Another possibility is a bent or broken blade, which would also require replacement.
General| Displacement | 160 cc |
|---|---|
| Cutting Width | 21 inches |
| Drive Type | Self-propelled |
| Vacuum System | Yes |
| Starting System | Recoil |
| Engine Type | Honda |
| Engine Size | 160 cc |
| Width | 27 in (68.6 cm) |
| Collection Bag Capacity | 40 gal (151 L) |
Details safety symbols and important instructions for safe operation and maintenance.
Specifies sound level at operator position and conditions of test.
Details vibration levels at operator's handles and test conditions.
Warning label to keep hands and feet away from moving parts.
Warning label about danger from flying debris during operation.
Warning label for safety guards on the equipment.
Step-by-step guide for operating the sod cutter safely and effectively.
Items included with the Billy Goat Sod Cutter shipment.
Steps for assembling the sod cutter handles and controls.
Lever to engage and disengage blade movement.
Lever to adjust engine revolutions for operations.
Lever to engage/disengage transmission and operate brake.
Lever to adjust cutting depth based on terrain and turf thickness.
Protective cover to prevent contact with moving parts.
Two-position switch for starting and stopping the engine.
Lever to select gears or neutral for forward movement.
Steps for starting the engine, including checks and procedures.
Guidelines for safely lifting and transporting the sod cutter.
Recommendations for storing the equipment, especially during long periods.
Advice on blade height, ground saturation, and engagement procedures.
Table outlining maintenance tasks at different intervals.
Procedure for checking and changing transmission oil with SAE 90.
Step-by-step guide for replacing the blade drive belt.
Procedure for replacing the forward control belt.
Information on the brake lever connection and adjustment.
How to check, replace, and maintain the cutting blade.
Routine checks including belt tension, component operation, and initial running.
Importance of maintaining correct tire pressure for stable operation.
Instructions for adjusting blade and forward control cables.
Common issues with engines, belts, and drive systems with their solutions.
Steps for submitting a warranty claim for defective parts or workmanship.
To Next Page
