Billy Goat SC181H User Manual

Part No. 373506 373506_B_HI
1
SC181H Owner’s Manual
Sod Cutter Owner’s Manual
SC181H, SC181HG
Beginning Serial #: 110116001
Original Instructions
IMPORTANT- READ CAREFULLY BEFORE USE AND KEEP FOR FUTURE REFERENCE
NOT FOR REPRODUCTION

Billy Goat SC181H Specifications

General

Engine Displacement	163 cc
Cutting Width	18 inches
Weight	90 lbs
Drive Type	Self-propelled
Wheel Size	8 inches
Deck Material	Steel
Engine Power	4.4 hp

Summary

Specifications

Intended Use

Defines the intended purpose of the sod cutter and operator training requirements for safe use.

Safety

Contains warnings about chemical exposure from engine exhaust and carbon monoxide.

Instruction Labels

Uncrating Instructions

Operator Controls

Drive Control

Details how the ground drive controls on the handlebars operate the machine's forward and reverse movement.

Blade Engage Lever

Explains the function and requirement for fully engaging the blade clutch lever during operation.

Blade Height Adjustment

Describes pre-selecting cutting depth using a pin and hole system for precise sod cutting.

Free Wheel Lever

Explains how to use the lever to disengage drive and allow the machine to free wheel.

Operation

Starting the Engine

Instructions for preparing and starting the engine, including oil, fuel, choke, and pull rope.

Handling and Transporting

Guidelines for safely moving the unit onto trucks or trailers using ramps, avoiding blade operation.

Cutting Operation

Tips for optimal cutting performance, including ground conditions and safety precautions.

General Operation

Advice on positioning the machine, following engine manual instructions, and avoiding tipping.

Maintenance

Periodic Maintenance

A schedule of maintenance tasks based on usage hours or time intervals for optimal machine performance.

Belt Replacement

Step-by-step instructions for replacing the blade drive belt, including safety precautions and part references.

Drive Belt Maintenance

Detailed procedure for removing and installing the drive belt, including tension adjustments and safety steps.

Checking and Replacing the Blade

Guidelines for inspecting the blade for damage or wear, and procedures for safe replacement or sharpening.

Cable Control Adjustment

Instructions for adjusting blade and drive control cables for proper tension and function, with lubrication advice.

Troubleshooting

Engine Service and Warranty

Warranty Claim Procedure

Steps for submitting a warranty claim for defects, including dealer interaction and required documentation.

Maintenance Record

Gearbox Assembly

Wheel Drive Assembly

Handle Bar Assembly

Height Adjust Assembly (Part 1)

Back Wheel Assembly (Part 1)

Frame Assembly

Frame Assembly Part 1

Diagram and part list for the first section of the frame assembly, including engine mounting components.

Frame Assembly Part 2

Diagram and part list for the second section of the frame assembly, including the gearbox and bumper.

Height Adjust Assembly (Part 2)

Engine Assembly

Speed Control Assembly