4
28.8 in (73.2 cm)
Assembled Non-Use Dimensions: 60.0 (L) x 28.8 (W) x 58.5 in (H) (152.4 x 73.2 x 148.6 cm)
Maximum In-Use Dimensions: 84.0 (L) x 28.8 (W) x 86.0 in (H) (213.4 x 73.2 x 218.4 cm)
Storage Dimensions: 20.0 (L) x 28.8 (W) x 66.0 in (H) (50.8 x 73.2 x 167.6 cm)
Weight (approx.): 59 lb (26.7 kg)
60.0 in (152.4 cm)
Important: Please review all labels and supporting materials before using your inversion table.
This drawing indicates the locations of the warning labels found on your product. If a label is missing,
illegible or is removed, contact Teeter Customer Service to request a complimentary replacement label.
Note: Image and labels below not shown at actual size.
SAFETY WARNING LABELS
& PRODUCT SPECIFICATIONS
SERIOUS INJURY OR DEATH MAY OCCUR IF PRECAUTION IS NOT TAKEN. To reduce this risk:
•
READ and understand instructions in User Guide and on equipment before attempting to use.
•
ALWAYS properly set Main Shaft height. Too short can cause rapid inversion and difficultly returning upright.
• TIPPING HAZARD: To store upright, leave A-Frame open enough to remain stable or secure to wall. If children are
present, store flat on floor, not upright.
•
DO NOT allow children to use this machine. Keep children, bystanders and pets away when in use.
•
Keep body parts, hair, loose clothing and jewelry clear of all moving parts.
•
Height / Weight Capacity: 4 ft 8 in - 6 ft 6 in (142-198 cm); 300 lb (136 kg). For consumer, indoor home-use only.
LX1053 0722-1
Replace labels and User Guide if damaged, illegible or removed.
WARNING
!
To RELEASE FROM FULL INVERSION LOCK-OUT, reach one hand behind
your head and pull the table bed toward your back. To RETURN UPRIGHT,
place arms to your sides. If this does not work, DO NOT SIT UP. Use handles
and BEND YOUR KNEES to shift body weight to the foot-side of the table bed. If
you have difficulty returning upright, consult the User Guide before next use.
!
WARNING
Replace label if damaged, illegible or removed.
58.5 in (148.6 cm)
To Next Page
Loading...
