14/40
USE
Before each use, verify that the unit is in good condition, the electric cord is not
damaged, if the power cord is damaged, it must be replaced by the manufacturer
or a competent qualified electrician or a person with similar qualifications, in
order to avoid any risk.
Before each use, make sure the electric cord is in good condition.
Insert the plug of the fan in the power supply.
Ventilation: select the desired speed with the selector (8).
1– Minimum speed 2–Medium speed 3–Maximum speed
To turn off, turn the switch to position 0 and then remove the plug from the
socket.
Horizontal oscillation (right-left): this is selected with the button (2) located on
the motor body. To stop the motion and keep the ventilator still, press the
button.
Vertical inclination (high-low): it is regulated by gripping the motor body and
orienting it in the direction desired.
When not in use for long periods, the plug must always be removed from the
socket.
CLEANING AND MAINTENANCE
Attention: before normal cleaning, remove the plug from the socket.
Clean the body with soft, slightly damp, cloth; do not use abrasive or corrosive
products.
Do not immerse any part of the fan in water or other liquid: if this should
happen, do not put your hand in the liquid, but first remove the plug from the
socket. Carefully dry the appliance and make sure that all the electrical parts
are dry: in the case of doubt, ask for professionally qualified help.
It is essential that the motor's air holes be kept from dust and lint.
If the fan will not be used for long periods, it must be protected from dust and
humidity; we recommend storing it in its original packaging.
Should you decide not to use the appliance any more, we recommend making
it inoperative by cutting the power cord (after making sure you have
disconnected the plug from the socket) and make dangerous parts harmless if
children are allowed to play with them (such as the blade).
To Next Page
Loading...
