CARE AND CLEANING
This appliance requires little maintenance.
After 2,000 hours of operation – the lubrication grease in the gearbox should be replaced.
We recommend dust is cleaned from the fan blade and protective grills every few months, to
keep it operating optimally.
After use and before cleaning, ensure the fan is OFF and the blades have come to a
complete stop.
Disassemble the front & rear grill & fan. Wipe parts with a damp cloth.
Do not use abrasive cleaners, harsh detergents, chemical cleaners or solvents as they
may damage the surface finish of the plastic components.
Refit the parts following the assembly instructions
Wipe the outside of oscillating fan body with a damp cloth and dry with another cloth or
paper towel.
SERVICE & CUSTOMER CARE
There are no user serviceable parts inside this appliance.
If the power cord or plug are damaged it must, for safety reasons, be replaced by Binatone
or an authorised Binatone repairer.
If you need help with:
• using your product
• servicing or repairs (in or out of guarantee)
• spare parts (fan blade, grill covers, locking nut)
Please contact Binatone Customer Service at:
To Next Page
Loading...