EN
EN ISO 4414: Pneumatic Fluid Power - General Rules and safety requirements
(General Manager)
10/2/15
by complying with the following statutory documents and harmonized standards:
EN ISO 12100: Safety of Machinery - General Principles for Design
EN ISO 4413: Hydraulic Fluid Power - General Rules and safety requirements
EN 12621: Machinery for the supply and circulation of coating materials under pressure - Safety requirements
EN1127-1: Explosive atmospheres - Explosion prevention - Basic concepts
EN 13463-1: Non electrical equipment for use in potentially explosive atmospheres - Basic methods and requirements
EN 13463-5: Non electrical equipment for use in potentially explosive atmospheres - Protection by constructional safety
Providing all conditions of safe use stated within the product manuals have been complied with and that the final equipment
into which this product is installed has been re-assessed as required, in accordance with essential health and safety
requirements of the above standards, directives and statutory instruments and also installed in accordance with any
applicable local codes of practice.
D Smith
Product Description
MX4**, MXL4**, MX12**, MXL12**, MX190***,
MX220***, MMX4**, MMX12**
This Product is designed for use with: Solvent and Water based Materials
Suitable for use in hazardous area: Zone 1 & 2
Protection Level: II 2 G X IIB T4 (NB 0891)
Manufacturer: Binks,
Ringwood Road,
Bournemouth, BH11 9LH. UK
EU Declaration of Conformity
We: Binks declare that the above product conforms with the Provisions of:
Machinery Directive 2006/42/EC
ATEX Directive 94/9/EC
To Next Page
Loading...
