Need help?Do you have a question about the Bio Compression Systems SC-2004-DL and is the answer not in the manual?
Lists the items included with the sequential circulator and garments.
Describes the medical conditions and settings for which the device is intended.
Lists conditions where compression therapy is not recommended.
Provides general guidance on setting pressure and treatment parameters.
Details the pressure range and adjustment capabilities of the pump.
Explains cycle time and its adjustment options for garment inflation/deflation.
Describes how to set and use timed treatment sessions on the device.
Explains the purpose and operation of Focus Therapy for targeted treatment.
Details the function of the Play/Pause button for session control.
Describes buttons, LEDs, and the main display on the front panel.
Identifies the garment and auxiliary connector ports on the device.
General safety advice related to electrical equipment and potential hazards.
Lists conditions and environments where the device should not be used.
Conditions requiring medical consultation before using the device.
Important instructions and precautions for operating the device.
Symptoms or events that require stopping use and consulting a doctor.
Guide to adjusting settings and enabling Focus Therapy.
Instructions on how to properly connect the garment to the pump.
Detailed steps for donning the leg and arm sleeves correctly.
General instructions for operating the sequential circulator safely.
Explains how to pause and resume treatment sessions.
How to adjust pressure while the device is running.
Procedure to view the device's usage hours.
Steps to restore factory settings and reset the compliance meter.
Instructions for cleaning the pump and tubing.
Procedures for disinfecting the garments using detergent or bleach.
Steps to diagnose and resolve issues with the pump not turning on.
Steps to diagnose and resolve issues with the garment not deflating.
Troubleshooting steps for low pressure issues.
Steps to diagnose and resolve unusual noises from the device.
Information on electrical energy and cleaning supplies used.
Details acoustic and electromagnetic emissions from the device.
Tips for reducing environmental impact during use and storage.
Specifies suitable environments for device operation.
Specifies suitable environments for transport and storage.
Information on handling the device at the end of its lifecycle.
Declaration regarding the device's electromagnetic emissions.
Details the device's immunity to electromagnetic interference.
Instructions on how to check the compliance meter readings.
Steps to reset the pump to factory settings for new patients.
Contact details for Bio Compression Systems, Inc.
Contact information for the EU representative.
General| Brand | Bio Compression Systems |
|---|---|
| Model | SC-2004-DL |
| Category | Fan |
| Language | English |
To Next Page
