Press [OK] key to enter auto off setting interface,
System ▼
Unlock 5
fAuto off 10
Auto Update NO
Press [Y] or [Z] key or number key to input dormancy time. Press [OK] key to
confirm. Then press [C] to save the setting.
2.4.9 Auto Update
Update the fingerprint template intelligently: During fingerprint sensor identification
process, the senor replaces the lowest-quality data with new, higher-quality data that it
acquired in the matching process. This enables the sensor to maintain high quality data
at all times, saving the user from repeated authentication attempts.
Press [←] or [→] key and shift to [Auto off] option：
System ▼
Unlock 5
Auto off 10
fAuto Update NO
Press [OK] key to enter auto off setting interface：
System ▼
Unlock 5
Auto off 10
fAuto Update NO
Press [Y] or [Z] key to choose ‘Yes’ or ‘No’, and then press [OK] key to confirm.
Then press [C] to save the setting.
2.4.10 Log setup
Log warning number has the highest limit of 5000. When the available records
memory is less than the “Glog Wrn”, system will prompt corresponding operation.
Press [Y] or [Z] key and shift to [Log Setup] option.
23
To Next Page
Loading...
Need help?
General