What to do if my bioBidet Toilet is not operating?
If your bioBidet Toilet isn't operating, there are a few potential causes: * The power may be switched off. If so, switch the power on and check your house's power supply system. * The seat may not be occupied. Make sure someone is sitting on the seat, as the unit has an occupied sensor. * If you have the BB-1000 model, the remote controller's battery might be exhausted. Try replacing the battery.
What to do if my bioBidet Toilet is leaking water?
If your bioBidet Toilet is leaking water, it could be due to a faulty connection. In this case, fix the connections. If the water is leaking from the main unit, it may be a faulty unit.
Why is the washing water not spraying on my bioBidet Toilet?
If the washing water isn't spraying from your bioBidet Toilet, consider these possibilities: 1. The water tank may not be filled. If this is the case, wait about one minute and then press the desired washing button again. 2. The shut-off valve might be closed. Turn on the shut-off valve. 3. There might be freezing inside the main unit or the water supply pipe. Heat the room for about two hours. Operating the unit while parts are frozen can cause a malfunction.
How to fix weak water pressure on bioBidet Toilets?
If the washing water pressure is weak on your bioBidet Toilet, here's what you can do: * The water pressure level may be set to “LOW”. If so, set the water pressure to “HIGH.” * The strainer might be clogged. Clean the strainer.
Why is the washing water not warm on my bioBidet Toilet?
If the washing water isn't warm on your bioBidet Toilet, it could be because: * The water temperature is set to “LOW”. In that case, set the water temperature to “HIGH.” * Continuous operation has depleted the supply of warm water. Wait about three minutes.
How to fix a bioBidet Toilet seat and dryer that is not warm?
If the seat and dryer on your bioBidet Toilet are not warm, it is likely because the seat & dryer temperature is set to “LOW”. To resolve this, set the seat & dryer temperature to “HIGH.”
Details electrical requirements, including GFCI outlet and grounding for safe operation.
Provides essential guidance on proper grounding methods to prevent electric shock.
Covers sitting on the seat, sensor activation, and initiating basic washing functions.
Details Posterior, Feminine, and Turbo Wash functions, including spray focus and pressure.
Details the oscillating spray feature, auto-setting, and how to cancel it.
Describes the massage function, including pulsation, pressure, and auto-setting features.
Important safety precautions to follow prior to beginning the installation process.
Steps for cleaning the water strainer to maintain optimal product performance.
Diagnoses and remedies for issues where the washing water fails to spray.
Troubleshooting steps for when the bidet unit is not turning on or functioning.
General| Type | Bidet Toilet Seat |
|---|---|
| Nozzle Position | Adjustable |
| Self-Cleaning Nozzle | Yes |
| Remote Control | Yes |
| Energy Saving Mode | Yes |
| Water Heater | Yes |
| Seat Warmer | Yes |
| Deodorizer | Yes |
| Night Light | Yes |
| Warranty | 3 Years |
| Material | Plastic |
| Color | White |
| Heated Seat | Yes |
| Water Temperature Control | Yes |
| Power Source | Electric |
| Voltage | 120V |
| Temperature Control | Yes |
To Next Page
