What to do if my bioBidet Toilets unit is not operating?
If your bioBidet toilet isn't operating, first, ensure the power cord is properly connected. The unit also has an occupied seat sensor, so the seat must be occupied for it to work. Lastly, check the remote controller's battery and replace it if exhausted.
How to fix bioBidet BB2000 Toilets when the washing water does not spray?
If the washing water from your bioBidet Toilets is not spraying, several factors could be at play. Initially, the water tank might not be full, so allow about a minute for it to fill. Check that the shut-off valve is open. Also, if the unit or water supply pipe is frozen, heat the room for approximately two hours. Operating the unit while frozen can cause damage.
Why is the washing water pressure weak on my bioBidet Toilets?
If the washing water pressure from your bioBidet Toilets seems weak, you can try a few things. First, check the water pressure level setting and ensure it is set to “HIGH”. Also, inspect the strainer for any clogs and clean it, if necessary.
Why is the washing water not warm in my bioBidet BB2000 Toilets?
If the washing water from your bioBidet Toilets is not warm enough, first, check that the water temperature is set to “HIGH”. If you've been using it continuously, the supply of warm water may be depleted; wait about three minutes for it to reheat.
General| Model | BB2000 |
|---|---|
| Category | Toilets |
| Heated Seat | Yes |
| Warm Air Dryer | Yes |
| Oscillating Clean | Yes |
| Nozzle Material | Stainless Steel |
| Remote Control | Yes |
| Deodorizer | Yes |
| Night Light | Yes |
| Material | Plastic |
| Water Heater | Tankless |
| Warranty | 3 Years |
| Water Temperature Control | Yes |
| Nozzle Position Adjustment | Yes |
| Nozzle Self-Cleaning | Yes |
| Color | White |
| Nozzle Type | 3-in-1 Nozzle System |
To Next Page
