28 29
10. Nozzle Change
INSTALLATION (CONT.) UNIT SEPARATION
Nozzle Separation
Nozzle Combination
Separation of Unit From Toilet Bowl
1. Disconnect the power plug.
2. Close water supply shut-off valve.
3. Drain water from bidet seat using drainage as illustrated.
4. Remove bidet seat from toilet as illustrated.
DO NOT TURN UNIT UPSIDE DOWN
9. Wireless Remote Mounting Guide
• Remove adhesive from back of bracket and place bracket where desired.
• Insert supplied batteries (1.5V AAA) and close battery cover.
To Next Page
Loading...
