BIO BIDET BBC-70
4
Remove existing seat and lid.
Release the bolts on both side of
the existing toilet seat.
2
3
Connect supplied T valve to the
toilet fill valve. Note T valve will
be connected directly to toilet fill
valve, not the shut off valve. Then
connect rest of water lines to
connected T valve.
3
3
Mount bidet and toilet seat/lid
over toilet mounting holes.
Supplied rubber O-rings should be
placed under the bidet mounting
bracket to protect and secure
bidet on the toilet.
4
3
Open shut off valve and
check for any leaks.
5
9
Flexible Hose
(Not Included)
To Next Page
Loading...
