BIO BIDET@ SLIM ZERO
Installation Procedure
• First installation method (recommended)
1. Completely remove the old toilet seat & lid
Old toilet seat
3.Attach the catch plate
• Attach the catch plate in the toilet seat holes. Adjust
the position Ofmounting bolts and adjusting pieces to
line up the mounting bolts to the expansion nuts.
Then tighten to secure the catch plate.
Keep this side with FRONT up
catch plate
e Second installation method
1. Remove the old toilet seat.
Refer to first installation method step 1.
2. Install expansion nuts. Be sure to firmly press
down so the top of the expansion nut is flush
with the ceramic toilet surface.
4. Install the bidet seat
• Line up the bidet with the catch plate then push the
bidet seat onto the catch plate. You will hear the
bidet seat click into the place.
Slots under bidet seat
2. Put the catch plate over the toilet seat mounting holes in the ceramic of the connecting bolts
with adjusting pieces. Screw on the nuts from underneath the toilet. Then tighten to secure the
catch plate. Refer to the first installation step 3.
3. Install the bidet seat,Line up the bidet with the catch plate, you will hear the seat click
into place
4
To Next Page
Loading...
