BIODEX MEDICAL SYSTEMS, INC. © 2015 2-1
2. Assembly And Table Operation
Relocating The Table
CAUTION: Before moving the table with a patient, make sure side rails are in the up
position and restraining straps are in place to secure the patient.
ATTENTION: Avant de déplacer la table avec un patient, assurez-vous que les rails
latéraux sont dans les courroies hautes de position et de corps en place pour fixer le
patient
This table can be easily moved across smooth surfaces.
To move the table, release the central locking system by pressing with your foot on the short end
of the central locking lever. All four wheels release at the same time.
Once positioned, depress the end of the lever to engage the central locking system, ensuring
stability.
NOTE: In addition to the central locking system, each wheel can be locked individually by stepping
down on the individual wheel lock lever.
Height Adjustment
Table height is conveniently adjusted with the hand-held or optional foot
controller. D-ring holders are provided on the end of the straps at each side of the
table frame to hold the hand-held controller when it is not in use. The hand-held
controller can be moved to either side of the table. A power light on the controller
indicates that power from the control box is on.
• To raise the table: press and hold down the table up button.
• To lower the table: press and hold down the table down button.
NOTE: The control box, located underneath the tabletop, is labeled with
controller specific information.
Trendelenburg/Reverse Trendelenburg Positioning
The table can provide up to 15° Trendelenburg or 30° Reverse Trendelenburg positioning by
raising or lowering either the head or foot end of the table with the hand-held or optional foot
controller.
• For Trendelenburg positioning: press and hold down the foot-end up button on the hand-held
controller. This will simultaneously raise the foot end and lower the head end of the table. Release
the button when the desired angle is achieved.
To Next Page
Loading...