2-4 ECHO/VASC PRO VASCULAR ULTRASOUND TABLE
Storing The Foot Support Platform Beneath The Tabletop:
1. The foot support must be located in the stop (closest to the foot end of the table).
2. To return the foot support to its furthest point, raise it and move it to the last stop.
3. Stand behind the foot support with both hands on the top edge, raise the support and pull
toward you.
4. The foot support will drop below the tabletop.
5. Once the support starts to drop below the tabletop, push it forward as it slides completely
underneath the tabletop.
6. The foot support will rest beneath the table securely in place.
Return Foot Support Platform To Tabletop Position:
1. Grab the top edge of the support with both hands and pull up toward you.
2. Once the support has cleared the tabletop, raise it again and slide the foot support forward
to the desired stop.
Remove Foot Support Platform Completely:
1. The platform must be positioned on the tabletop.
2. Using a Phillips screwdriver, remove the two safety screws, one on each side of the foot
support beneath the tabletop.
3. With two hands on the top edge of the support, lift the platform high and pull toward you.
To Next Page
Loading...
