33
Treatment Array
CAUTION SURFACES MAY
GET HOT
Heat Warning
It is normal for the Treatment Array surface to
get warm after extended use.
In the event that the Treatment Array gets hot,
the system will pause until the temperature
has dropped. The Treatment Array needs to
be cooled for at least 15 minutes before it is
used again.
CLASS I LED
Class I LED
This product uses LEDs that under normal use
do not pose a danger to the eyes.
General Warning Symbol
UL Mark
The UL mark is a registered trademark of the
Underwriters Laboratories Inc. with respect
to electric shock, re, mechanical and other
speci ed hazards.
To Next Page
Loading...