34
Electromagnetic Compatibility
(EMC)
This equipment complies with the European rules for EMC according to
the safety standard IEC 60601-1-2. The device complies with EMC rules
under test conditions that include use of system cables and connectors
between system components.
This equipment requires special precaution with regard to the EMC and
must be installed and placed into service according to the information
provided in this manual.
The use of accessories and cables other than those specied and sold by
the manufacturer may result in increased emissions or decreased immunity
of the equipment and may cause the system to be non-compliant with the
requirements of IEC 60601-1-2. Replace cables and connectors between
components only with BioFlex approved cables and connectors.
This system may cause radio interference or may disrupt the operation
of nearby equipment. It may be necessary to take appropriate measures,
such as reorienting or relocating the equipment or shielding the location.
To Next Page
Loading...