BIOS 3AL1-3E - Using the Device; 3.1 Setting the Time and Date

3. Using the Device
This section describes how to get the maximum benefit from your 3AL1-3E blood
pressure monitor. Follow the instructions carefully to get an accurate measurement of
your blood pressure and pulse rate.
3.1 Setting the Time and Date
When you insert the batteries for the first time (see “Inserting the batteries”), the
3AL1-3E prompts you to set the current date and time. You can also adjust the date
and time at any time by pressing and holding down the
button for over 3 seconds.
Followthesestepstosetthedateandtime:
1.Whenyoureplacethebatteries,theLCDscreenstartsashingthecurrentyear
setting. Press the button repeatedly to adjust the year and then press the
button to confirm the setting.
2.Next,thescreenstartsashingthemonthanddatesetting.Pressthe button
repeatedly to set the month and date, and then press the button to confirm the
settings.
3.Lastly,thescreenstartsashingthehourandminutevalues.Pressthe button
repeatedly to set the hour and minutes and then press the button to confirm
the settings.
SYS.
mmHg
DIA.
mmHg
Pulse
/ min
TIME
MONTH-DATE