Need help?Do you have a question about the BIOS dry-cal dc-lite and is the answer not in the manual?
General| Brand | BIOS |
|---|---|
| Model | dry-cal dc-lite |
| Category | Measuring Instruments |
| Language | English |
Describes the physical layout, ports, and window on the front and side of the DC-Lite.
Details the ports located on the back and side of the DC-Lite unit.
Lists the essential components included with the DC-Lite device shipment.
Details the buttons, indicators, and display elements of the DC-Lite control panel.
Instructions on how to power on the DC-Lite unit.
Steps to disable and re-enable the automatic 5-minute power-off feature.
Procedure for obtaining a single flow measurement reading.
Procedure for taking continuous flow readings in auto-repeat mode.
Steps for setting up and connecting a printer to the DC-Lite.
Options for configuring print modes (Off, 10, All) for data output.
Procedure to stop a flow reading and reset the unit.
Resets printed sequence and averaging count, initiating a printed heading.
Instructions on how to properly charge the DC-Lite's internal battery.
Guidelines for maintaining and storing the DC-Lite's lead-acid battery.
Recommendations for use with MFCs to avoid discrepancies and ensure accuracy.
Guidelines for using the DC-Lite with personal air samplers, including isolation.
General care instructions for the DC-Lite unit.
Procedure for performing a quality assurance leak test on the flow cell.
Details the specific services provided as part of the calibration process.
To Next Page