How to Manually Adjust Your SKYVIEW
SKYVIEW can be operated without being connected to any schedule. The
SKYVIEW Dial can be used to turn the lamp on, o or dim it. You can also switch
scenes between daytime and nighttime modes.
On / O (Manual)
Pushing down on the dial and releasing it will toggle between on and o.
Dim Operation (Manual)
Turning the dial will dim or brighten your SKYVIEW.
Daytime / Nighttime Operation (Manual)
Pushing down on the dial and holding it for 4 seconds will switch the lamp from
day mode to night mode.
Pairing Mode (Manual)
Pushing down on the dial and holding it for 10 seconds will put SKYVIEW into
pairing mode. When SKYVIEW is in pairing mode it will ash with red light until the
app on your mobile phone or a new device is detected.
Customer Support
Visit us online at www.skyviewlight.com, or you can reach us at
customerservice@skyviewlight.com
15
SkyView™ is a registered trademark ©2023 of Biological Innovation and Optimization Systems, LLC. | Skyviewlight.com
To Next Page
Loading...