Biostar A10N-8800E User Manual

FCC Informaon and Copyright
This equipment has been tested and found to comply with the limits of a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protecon
against harmful interference in a residenal installaon. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instrucons,
may cause harmful interference to radio communicaons. There is no guarantee that interference
will not occur in a parcular installaon.
The vendor makes no representaons or warranes with respect to the contents here and
specially disclaims any implied warranes of merchantability or tness for any purpose. Further
the vendor reserves the right to revise this publicaon and to make changes to the contents here
without obligaon to nofy any party beforehand.
Duplicaon of this publicaon, in part or in whole, is not allowed without rst obtaining the
vendor’s approval in wring.
The content of this user’s manual is subject to be changed without noce and we will not be
responsible for any mistakes found in this user’s manual. All the brand and product names are
trademarks of their respecve companies.
Dichiarazione di conformità sinteca
Ai sensi dell’art. 2 comma 3 del D.M. 275 del
30/10/2002
Si dichiara che questo prodoo è conforme
alle normave vigen e soddisfa i requisi
essenziali richies dalle direve
2004/108/CE, 2006/95/CE e 1999/05/CE
quando ad esso applicabili
Short Declaraon of conformity
We declare this product is complying with the
laws in force and meeng all the essenal
requirements as specied by the direcves
2004/108/CE, 2006/95/CE and 1999/05/CE
whenever these laws may be applied

Biostar A10N-8800E Specifications

General

Brand	Biostar
Model	A10N-8800E
Category	Motherboard
Language	English

Summary

FCC Information and Copyright

Chapter 1: Introduction

1.1 Before You Start

Important safety and preparation guidelines before installing the motherboard.

1.2 Package Checklist

List of items included in the motherboard package for user reference.

1.3 Specifications

Detailed technical specifications of the motherboard hardware and components.

1.4 Rear Panel Connectors

Diagram and description of the ports and connectors on the motherboard's rear panel.

1.5 Motherboard Layout

Diagram illustrating the location of key components and headers on the motherboard.

Chapter 2: Hardware Installation

2.1 Connect Cooling Fans

Instructions for connecting CPU and system fans to the motherboard headers.

2.2 Install System Memory

Step-by-step guide for installing DDR4 memory modules into the DIMM slots.

2.3 Expansion Slots

Information on installing expansion cards in PCIe and M.2 slots.

2.4 Jumper & Switch Setting

Explanation of jumper settings, including clear CMOS jumper configuration.

2.5 Headers & Connectors

Details on ATX power connectors, front panel headers, and other internal connectors.

Chapter 3: UEFI BIOS and Software

3.1 UEFI BIOS Setup

Guide to accessing and configuring BIOS settings for the system.

3.2 BIOS Update

Instructions on how to update the motherboard's BIOS using different utilities.

3.3 Software

Information on installing and launching system software and utilities.

Chapter 4: Useful Help

4.1 Driver Installation

Steps for installing motherboard drivers and software from the provided DVD.

4.2 AMI BIOS Beep Code

List of AMI BIOS beep codes and their meanings for diagnostics.

4.3 Troubleshooting

Common troubleshooting solutions for system startup and hardware issues.