EasyManua.ls Logo

Biostar A57A - User Manual

Biostar A57A
51 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
A57A Setup Manual
FCC Information and Copyright
This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. There is no guarantee
that interference will not occur in a particular installation.
The vendor makes no representations or warranties with respect to the
contents here and specially disclaims any implied warranties of merchantability
or fitness for any purpose. Further the vendor reserves the right to revise this
publication and to make changes to the contents here without obligation to
notify any party beforehand.
Duplication of this publication, in part or in whole, is not allowed without first
obtaining the vendor’s approval in writing.
The content of this user’s manual is subject to be changed without notice and
we will not be responsible for any mistakes found in this user’s manual. All the
brand and product names are trademarks of their respective companies.
Dichiarazione di conformità
sintetica
Ai sensi dell’art. 2 comma 3 del D.M.
275 del 30/10/2002
Si dichiara che questo prodotto è
conforme alle normative vigenti e
soddisfa i requisiti essenziali richiesti
dalle direttive
2004/108/CE, 2006/95/CE e
1999/05/CE
quando ad esso applicabili
Short Declaration of conf ormity
We declare this product is complying
with the laws in force and meeting all
the essential requirements as specified
by the directives
2004/108/CE, 2006/95/CE and
1999/05/CE
whenever these laws may be applied

Table of Contents

Questions and Answers

  • C
    Christopher NewmanAug 9, 2025
    How to troubleshoot no power issue on Biostar A57A Motherboard?
    • S
      Sara WilsonAug 9, 2025
      If there's no power in your Biostar Motherboard system, ensure the power cable is securely plugged in. If the problem persists, try replacing the power cable. If neither solution works, it may indicate a more significant issue.
  • V
    Victoria NunezAug 14, 2025
    What to do if Biostar A57A won't boot after installing a second hard drive?
    • M
      Mark BlanchardAug 14, 2025
      If your Biostar Motherboard system fails to boot after installing a second hard drive, ensure that the master/slave jumpers are correctly set. Also, run the SETUP program and select the correct drive types. If issues persist, contact the drive manufacturers to verify compatibility with other drives.
  • D
    David SmithAug 18, 2025
    Why Biostar A57A only boots from optical drive?
    • A
      anthonydyerAug 18, 2025
      If your Biostar Motherboard system boots from the optical drive but not from the hard disk drive, check the cable running from the disk to the disk controller board, ensuring both ends are securely plugged in. Also, verify the drive type in the standard CMOS setup. Backing up the hard drive is extremely important, as all hard disks are capable of breaking down at any time.
  • Z
    zscottAug 25, 2025
    What to do if Biostar A57A shows “Invalid Configuration” or “CMOS Failure”?
    • P
      pennybishopAug 25, 2025
      If your Biostar Motherboard displays an “Invalid Configuration” or “CMOS Failure” message, review the system’s equipment and ensure the correct information is entered in the setup.
  • M
    michael63Aug 29, 2025
    How to fix Biostar A57A when it only boots from optical drive?
    • D
      Diane WheelerAug 29, 2025
      If your Biostar Motherboard system only boots from an optical drive, you should back up your data and application files. Then, reformat the hard drive and reinstall your applications and data using backup disks.
  • D
    Donald LucasSep 3, 2025
    What to do if Biostar A57A system is inoperative but has power?
    • J
      John BarrySep 3, 2025
      If your Biostar Motherboard system is inoperative but the keyboard lights are on, the power indicator lights are lit, and the hard drives are running, press down firmly on both ends of the DIMM until the module snaps into place, applying even pressure.

Biostar A57A Specifications

General IconGeneral
Form FactorATX
SocketFM2+
ChipsetAMD A57
Memory Slots4
USB Ports4 x USB 3.0, 6 x USB 2.0
LANRealtek RTL8111H Gigabit LAN
Storage4 x SATA 6Gb/s
Video OutputsHDMI
AudioRealtek ALC887
Expansion Slots1 x PCIe 3.0 x16, 1 x PCIe 3.0 x1

Related product manuals