To Next PageTo Next PageWhat to do if there is no power in Biostar A58ML Motherboard system?
If there is no power in your Biostar Motherboard system, and the power LED, power supply fan, and keyboard indicator light are not working, ensure the power cable is securely plugged in. If the problem persists, try replacing the power cable. If the issue still isn't resolved, contact technical support.
Why Biostar Motherboard doesn't boot from hard disk but boots from optical drive?
If your Biostar Motherboard system boots from the optical drive but not the hard disk drive, check the cable connecting the disk to the disk controller board, ensuring both ends are securely plugged in. Also, verify the drive type in the standard CMOS setup. Backing up the hard drive is extremely important, as hard disks can fail at any time.
What to do if Biostar Motherboard cannot boot after installing a second hard drive?
If your Biostar Motherboard system fails to boot after installing a second hard drive, set the master/slave jumpers correctly. Then, run the SETUP program and select the correct drive types. For compatibility issues with other drives, contact the drive manufacturers.
What to do if Biostar A58ML system is inoperative but keyboard lights are on?
If your Biostar Motherboard system is inoperative but the keyboard lights are on, the power indicator lights are lit, and the hard drives are running, press down firmly on both ends of the DIMM until the module snaps into place, applying even pressure.
How to resolve 'Invalid Configuration' error on Biostar A58ML?
If your Biostar Motherboard displays an 'Invalid Configuration' or 'CMOS Failure' message, review the system’s equipment and ensure the correct information is in the setup.
General| Brand | Biostar |
|---|---|
| Model | A58ML |
| Category | Motherboard |
| Language | English |
Provides essential precautions and preparation steps before installing the motherboard.
Details CPU support, chipset, memory, storage, and expansion slot specifications.
Step-by-step guide for correctly installing the CPU into its socket.
Instructions for properly mounting the CPU heatsink and fan assembly.
Details on connecting CPU and system fans to motherboard headers.
Guide on how to install DDR3 memory modules into the DIMM slots.
Step-by-step instructions for inserting DDR3 DIMMs securely into slots.
Information about PCI-Express slots and installing expansion cards.
Introduces the different methods available for updating the motherboard's BIOS.
Step-by-step guide to updating the BIOS using the dedicated utility.
Guide for performing a BIOS update via an internet connection.
Instructions for updating the BIOS using the built-in BIOSTAR BIOS Flasher utility.
Procedure for updating BIOS using a USB flash drive and the flasher utility.
Provides solutions for common problems like no power, boot failures, or drive issues.
Information on integrating discrete graphics with APU graphics for enhanced performance.
Step-by-step instructions to configure and enable AMD Dual Graphics.
